|
[China]
Trade Verify
Address: No.755, Xianyuehuan Rd, Tianyuan District, Zhuzhou, Hunan Province
Contact name:Shirley
Zhuzhou Ruideer Metallurgy Equipment Manufacturing Co.,Ltd |
|
Verified Suppliers
|
|
|
300*300*900 Metal Sintering Furnace adopts molybdenum as heating element
Design standards:
The metal vacuum sintering furnace is a single chamber and double
door horizontal and periodic heating structure,which is designed
for easy handling and maintenance, the whole process is controlled
automatically.It can realize full load continuous operation, 300
furnace times/year or 300 working days/year.It uses graphite
element resistance heating (low voltage, high current) .In
addition, there are multiple heating units, each of which controls
the temperature separately.It equipped with fully automatic control
function and safety interlock function.The whole process is
automatically controlled, monitored, tracked and recorded by
computer.The PLC, industrial computer (PC) control to realize the
whole process of one-key start, real-time dynamic monitoring,
computer will save temperature, pressure, vacuum and other
parameters ,alarm interlocking is safe and reliable.
Technical parameters of equipment
Effective working zone size(W*H*L) | 300mm×300mm×900mm |
Max.loading capacity | 100kg(it depends on the type of product) |
Working temperature | 1600℃(The maximum design temperature) |
1420℃(Filling hydrogen working temperature) | |
| 1550℃(The actual working temperature) | |
Pumping speed | The vacuum degree can reach 5Pa within 30min after the pump is started, and the limit vacuum value can reach 1Pa after pumping for 30min after reaching 5Pa (After drying the furnace,under the empty furnace, clean and cold state) |
Leakage rate | ≤3Pa/h (Measuring the limit vacuum after drying the furnace, stop the operation of the pump group and start the test.Average within 3 hours in empty furnace, clean and cold state) |
Cooling speed | The furnace is empty.From 1450℃ cooling to 100℃ will cost less than and equal to 3 hours.(Water temperature≤28℃,2bar≤Water pressure≤3bar) |
Cooling mode | The inner furnace is equipped with rapid cooling fan and water cooling will cooling with the furnace. |
Heating element material | Graphite |
Heating zone quantity | 2 zone or 3 zone control temperature independently |
Temperature control mode | PID adjustment |
Heating power | About 220KVA |
Wax collection rate
| ≥98%(10kg paraffin refined wax ,Ar negative pressure debinding ,three averages at most |
Uninterrupted power supply guarantee time
| It can power the indicator lights and control the furnace when the power goes out,the time is more than or equal 80 minutes. |
Equipment function:
Automatic leak detection function
Ar negative pressure debinding function
H2 micro-positive pressure debinding function
Vacuum sintering function
Ar partial pressure sintering function(Dynamic and static partial
pressure)
Vacuum cooling function
Electrified cooling and thermal insulation function
Rapid cooling function(Put a heat exchanger inside)
Fully automatic control function
Safety interlock function
Break point reheating function
Wireless remote diagnosis function
Equipment system:
It mainly includes control system,heating system,positive and
negative pressure vacuum system,cooling water system, rapid cooling
system,safety system and auxiliary system.
After sales:
1. Installation, Commissioning and Acceptance
We do installation, commissioning and acceptance in buyer's plant.During the installation and commissioning period, the commissioning personnel shall be provided free of charge by the demander according to the staff standard.
The equipment shipped to the buyer, the seller received the buyer's
notification, both within a week to carry the equipment out of the
box together, then check the equipment and all components according
to the packing list . Including equipment accessories, spare parts
and special tools, attached manual and technical documents, etc. It
can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted
according to the technical accessories.
2. Training
When taking-over the Furnace to the customer, We will give a staff
training to customer. The operating personnel of the customer
should join to commission,test the furnace, when installing at
customer’s company.
This is practical operation training and practical maintenance
training,and our technical personnel will telling the basic
principle,equipment maintenance knowledge,And the common fault
handling measures.We can training 2 ~ 3 workers. ( Training how to
maintenance and operating.)
3. Warranty period
The warranty period of the equipment is 12 months, which starts from the date of installation and debugging of the supplier. Equipment failure happens, after-sales service personnel shall give solutions within 2 hours, after receiving the buyer's notification . If it is need to go to the site for treatment , operators dispatched by seller should arrive at the site within 48 hours after go aboard. In case of emergency,operators should arrive at the site within 48 hours after go aboard, and continue to make repairs until the fault is removed and the equipment returns to normal.
