Zhuzhou Ruideer Metallurgy Equipment Manufacturing Co.,Ltd |
Verified Suppliers
|
|
High performance sinter-HIP furnace---excellent hard alloy product maker
Main application
It is used for debinding of high-performance hard alloy materials
(it can realize the process of positive and negative pressure
dewaxing, and the forming agent is paraffin, PEG or rubber),
hydrogen discharge, vacuum sintering, partial pressure sintering,
pressure sintering, rapid cooling and other batch production
operations and research and development operations in the
laboratory.
Total requirements
The cemented carbide pressure sinter-HIP furnace is single chamber,
horizontal and periodic heating. It adopts low voltage and large
current graphite electric heating element for heating. It has
several heating units, each of which controls the temperature
separately.It has debinding function,which can achieve the positive
and negative pressure of two removal processes, molding agent for
paraffin, PEG or rubber).Moreover,it also can realize hydrogen
discharge, vacuum sintering, partial pressure sintering, sinter-HIP
and rapid cooling functions. The whole process by computer
automation control, monitoring, tracking, fault self-diagnosis
simulation display and record.
Basic technical parameters and user supporting conditions | |
Design operating times |
6000 furnace time/year |
Graphite inner tank valid space | 500×500×1800mm |
Max.loading capacity | 1500kg |
Max.working temperature | 1550℃(under the circumstance of vacuum sintering,heating up to1600℃) |
Max.design pressure | 10.0MPa |
Max.working pressure | 9.5MPa |
Ultimate vacuum degree | 2pa (In the empty furnace, clean, cold state, after the vacuum pump started for 60 minutes) |
Pumping speed |
Up to 5PA within 30 minutes of starting pump (in empty furnace, clean, cold state)
|
Leakage rate (3-hour average, empty furnace, heating up furnace)
|
Average value of 3Pa /h (empty oven, oven, clean, cold)
|
Wax collect yield(negative pressure dewaxing) |
(Argon negative pressure dewaxing of 10Kg pure paraffin) |
After sales:
1.Installation, Commissioning And Acceptance
We do installation, commissioning and acceptance in buyer's plant.During the installation and commissioning period, the commissioning personnel shall be provided free of charge by the demander according to the staff standard.
The equipment shipped to the buyer, the seller received the buyer's
notification, both within a week to carry the equipment out of the
box together, then check the equipment and all components according
to the packing list . Including equipment accessories, spare parts
and special tools, attached manual and technical documents, etc. It
can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted
according to the technical accessories.
2.Training
When taking-over the Furnace to the customer, We will give a staff
training to customer. The operating personnel of the customer
should join to commission,test the furnace, when installing at
customer’s company.
This is practical operation training and practical maintenance
training,and our technical personnel will telling the basic
principle,equipment maintenance knowledge,And the common fault
handling measures.We can training 2 ~ 3 workers. ( Training how to
maintenance and operating.)
3. Warranty period
The warranty period of the equipment is 12 months, which starts from the date of installation and debugging of the supplier. Equipment failure happens, after-sales service personnel shall give solutions within 2 hours, after receiving the buyer's notification . If it is need to go to the site for treatment , operators dispatched by seller should arrive at the site within 48 hours after go aboard. In case of emergency,operators should arrive at the site within 48 hours after go aboard, and continue to make repairs until the fault is removed and the equipment returns to normal.