Micro Sintered Porous Metal Plate Corrosion Resistant And High Temperature Resistant

Micro Sintered Porous Metal Plate Gas Diffusion Layer  Porous Titanium Electrode

1. Sintered metal porous materials

Porous titanium plate is a kind of material with excellent filtration performance and is usually made by metal powder rolling method. Powder rolling is a process in which metal powder is used as raw material to directly roll metal into material. First of all, strip is rolled on powder rolling mill, and then through sintering, cold rolling (or hot rolling) and annealing, dense or porous finished sheet and strip can be made.

2.Application of porous titanium plate

1, the supply of porous sintered titanium plate is a consumable, although more durable than other filter elements, but in the process of cleaning and disassembly should pay attention not to scratch and touch, hit, fall and other phenomena, to prevent human damage. It is strictly prohibited to apply force to the surface of the filter element with tools.

2. Under normal circumstances, the filtrate is filtered from the outside to the inside of the filter element, and reverse filtration is not advocated.

3. When filtering, slowly pressurize to the required working pressure, and it is strictly prohibited to open the full valve instantly and rapidly pressurize.

4. Working pressure ≤ 2Mpa. When the filtration efficiency is less than 50%, clean air or clean liquid should be used in time for online backblowing and backwashing.

5. When the titanium filter element is backblown and backwashed, it is generally backblown with pure gas first, and the backblowing pressure is 1.2-1.5 times of the working pressure. The backblowing time is 3-5 seconds each time.

6. If the pressure loss of the filter element is still serious after online backblowing and backwashing, it should be removed in time

5. Physical properties of porous titanium materials

6. Main products