Active Member
|
[China]
Address: Jinkaiyue Business Center, No.188# Zhanqian Road, Lubei District
Contact name:Emily Liu
Sinom Group Co., Ltd. |
|
Copper moulds have played an important role in the development of the continuous casting process .Their function is to receive the molten steel and to allow rapid heat transfer from the steel to the cooling water to enable quick solidification. The mould must exhibit excellent thermal conductivity, be resistant for thermal erosion, and be resistant to distortion from thermal stress.
Mould material:The tough working condition of copper mould tube requires its material with excellent tensile strength, enough hardness, low elongation & good thermal conductivity. After many years experiment in our Lab & steel mills, now we are manufacturing copper mould tube with widely accepted material as : Tp2, CU-Ag0.1 & Cu-Cr-Zr.
Typical coatings are : Cr, Ni, Cr-Ni, Ni-Fe, Ni-Co
The following is the products list of our SINOM group for your reference:
Item Name Shape/Size | Radius | Thick | Length | Taper design (Unit: mm) | |
Square &Rectangular Mould | Square 60x60~700x700 | 4000-17000 | 6~50 | 700-1000 | Design with single taper, double Tapers, triple tapers, quadruple tapers, parabolic taper,double parabolic taper, and convex . |
Rectangular (70~500)x500 | |||||
Round mould | 110-1200 | 6000-17000 | 10~50 | 700-1000 | Design with double tapers, triple taper Multi-taper, parabolic tapers & convex |
Beam blank mould | As per order | 6000-17000 | 12~50 | 700-1000 | triple taper Multi-taper, parabolic tapers & convex |
