Linear Scale 2 / 3 Axis Digital Readout DRO Opitical Sensor For Milling Machine Lathe

Linear Scale Digital Readout 2/3 Axis DRO Opitical Sensor for Milling Machine Lathe

SDS6-3V digital readout employs the newest 16 bit SCM technology, can substitute all kinds of basic function and special required function of SDS2 series, and all-purpose DRO

The speed of measurement it faster, and the contron system is easier and smoother.

Each axis can supply 40 point of non-linear compensations. 
 

Improved Functions of SINO Opitical Sensor

1. EDM functions: Combine with two kinds of EDM processing function of common DRO SDS2 and it can be set flexible.
2. Lathe's axes-accumulative sampling function: We can choose to display the accumulative value of the axes Y and Z or the singleness value of  each one(Axes Y, Z are  correspond to Z, Z0 of old model SDS2). During this function. users can separate the data of axes Y by using relecantly buttons in order to observe the singlenss date of axes Y. In the separation mode, we can set the value of axes X, Y and Z, it has complete functions for the lathe requires three axes.

Specifications of SINO SDS6-3V Digital Readout System

Supply Voltage range: AC 80V~260V; 50~60Hz,US Plug available

Power consumption: 15VA

Operating temperature: 0~45 degrees centigrade

Storage temperature: -30~70 degrees centigrade

Readout allowable input signal: TTL/RS422 square wave

Allowable input signal frequency: Less than 5MHz

Display resolution: 5µm/1µm/0.5µm/0.1µm

Min resolution of digital display angle : 0.0001/pulse

Product image /photos:

The rack in the picture is optioned, not standard product.