|
[China]
Trade Verify
Address: No.2, Zhouliao Road, Langzhou Industrial Zone, Changping, Dongguan, Guangdong, China
Contact name:Amy Tse
MINGCHENG GROUP LIMITED |
|
Verified Suppliers
|
|
|
Two Components Pourable Polyaddition RTV2 Mould Making Liquid Silicone Rubber
Description
MC Silicone MCPLA Addition Cure Series is a two component
elastomeric cross-linking at roomtemperature. The polymerization
can be accelerated by heat (max.1500 C). The siliconecomponents are
delivered as liquids, which once mixed and cured transform into a
transparent,elastic and resistant material. Polymerization occurs
without formation of heat.
Features
Good flowability
High tear and tensile strength
Long shelf life with low shrinkage
Fast mixing
Easy processing due to the low viscosity
Applications
Molding applications requiring low shrinkage e.g., jewelry, automotive. It can be used tomake exceptionally strong and tear resistant molds for casting plaster/gypsum, wax, concrete/cement, resinsand other materials, etc.
Why Choose MC Silicone
Our service
1- We have experience in silicone field more than 10 years
2- We have different types of silicone with hardness from 0-60
shore A
3- We have different Mix ratio of Catalyst, can be colored as per
client request
4- We offer different way of shipping: air, sea, courier.
5- We offer silicone mold making technical support and develop new
products
Part A base silicone: 5kg, 20kg/drum or 200kg/drum
Part B Curing Agent: 1kg/bottle
When the silicone rubber is stored at or below 30 centi degree in the original unopened containers, Silicone Base and Curing agent have a usable life of 10 months from the date of production. After 10 months stockpiles use the Stir to mix the Part A silicone for some minutes, then the silicone can be use again, no influence for other performance.
