Active Member
|
[China]
Address: Sunbow Industrial Park, 2nd Industrial Zone, Xiacun Community, Gongming , Guangming New District, Shenzhen 518106
Contact name:Chris
Shenzhen Sunbow Insulation Materials MFG. CO., LTD |
|
|
Waterproof adhesive lined heat shrink tubing , Polyolefin electrical shrink tubing
Model Number: SB-SBRS-(3X, 4X)
Working temperature: -45ºC ~ 125ºC
Shrink temperature: 70ºC ~ 125ºC
Shrink ratio: 3:1 & 4:1
Structure
Adhesive-lined heat shrinkable tube adopts flame retardant, cross-linked polyolefin with an inner coating of hot-melt adhesive and outer layer that shrinks to provide electrical and mechanical protection. The outer layer has excellent insulation, wear and corrosion resistant performances. Inner layer has the excellence of low melt point and waterproof etc. It has passed UL, RoHS, Reach certifications with 600V and 300V.
Usage
3:1 adhesive-lined heat shrinkable tube with environmental sealing capability for a wide variety of electrical applications, including automotive and marine wire harness, wire spices, breakouts, and connector-to-cable transitions.
Standards
Production standards: UL224, CAN/CSA C22.2 NO198.1-99, SAE-AMS-DTL-23053/4
Dimension
| Inner Diameter | As Supplied(mm) ID | After Recovery(mm) | Standard Package (m/roll) | |||
| (mm) | (inch) | ID | Whole Wall Thickness | Adhesive Thickness | ||
| Φ2.4 | 3/32 | ≥2.4 | ≤0.80 | 0.85±0.15 | 0.40±0.10 | 200 |
| Φ3.2 | 1/8 | ≥3.2 | ≤1.00 | 0.95±0.15 | 0.40±0.10 | 200 |
| Φ4.8 | 3/16 | ≥4.8 | ≤1.60 | 1.10±0.15 | 0.40±0.10 | 100 |
| Φ6.4 | 1/4 | ≥6.4 | ≤2.20 | 1.20±0.15 | 0.45±0.10 | 100 |
| Φ7.9 | 5/16 | ≥7.9 | ≤2.70 | 1.35±0.15 | 0.50±0.10 | 100 |
| Φ9.5 | 3/8 | ≥9.5 | ≤3.20 | 1.45±0.20 | 0.50±0.15 | 50 |
| Φ12.7 | 1/2 | ≥12.7 | ≤4.20 | 1.70±0.20 | 0.50±0.15 | 1.22 |
| Φ15.0 | 5/8 | ≥15.0 | ≤5.20 | 1.80±0.20 | 0.55±0.15 | 1.22 |
| Φ19.1 | 3/4 | ≥19.1 | ≤6.30 | 2.00±0.20 | 0.55±0.15 | 1.22 |
| Φ25.4 | 1 | ≥25.4 | ≤8.50 | 2.10±0.25 | 0.55±0.15 | 1.22 |
| Φ30.0 | 1-1/4 | ≥30.0 | ≤10.20 | 2.20±0.25 | 0.60±0.15 | 1.22 |
| Φ39.0 | 1-1/2 | ≥39.0 | ≤13.50 | 2.40±0.25 | 0.60±0.15 | 1.22 |
| Φ50.0 | 2 | ≥50.0 | ≤17.00 | 2.70±0.25 | 0.80±0.15 | 1.22 |
| Φ64.0 | 2-1/2 | ≥64.0 | ≤21.00 | 3.00±0.30 | 0.80±0.20 | 1.22 |
| Φ76.0 | 3 | ≥76.0 | ≤25.00 | 3.00±0.30 | 1.00±0.20 | 1.22 |
| Φ90.0 | 3-1/2 | ≥90.0 | ≤30.00 | 3.00±0.30 | 1.00±0.20 | 1.22 |
| Φ100 | 4 | ≥100 | ≤34.00 | 3.00±0.30 | 1.00±0.20 | 1.22 |
| Φ125 | 5 | ≥125 | ≤42.00 | 3.00±0.30 | 1.00±0.15 | 1.22 |
| Inner Diameter | As Supplied(mm) ID | After recovery(mm) | Standard Package (m/roll) | |||
| (mm) | (inch) | Max ID | Whole Wall Thickness | Adhesive Thickness | ||
| Φ4.0 | 2/13 | ≥4.0 | ≤1.0 | 1.0±0.15 | 0.4±0.15 | 200 |
| Φ6.0 | 1/4 | ≥6.0 | ≤1.5 | 1.1±0.15 | 0.4±0.15 | 100 |
| Φ8.0 | 5/16 | ≥8.0 | ≤2.0 | 1.2±0.15 | 0.5±0.15 | 1.22 |
| Φ12.0 | 1/2 | ≥12.0 | ≤3.0 | 1.4±0.15 | 0.5±0.15 | 1.22 |
| Φ16.0 | 5/8 | ≥16.0 | ≤4.0 | 1.7±0.15 | 0.6±0.15 | 1.22 |
| Φ20.0 | 15/19 | ≥20.0 | ≤5.0 | 2.0±0.25 | 0.6±0.15 | 1.22 |
| Φ24.0 | 1 | ≥24.0 | ≤6.0 | 2.1±0.25 | 0.6±0.15 | 1.22 |
| Φ32.0 | 1 1/4 | ≥32.0 | ≤8.0 | 2.4±0.25 | 0.7±0.15 | 1.22 |
| Φ52.0 | 2 | ≥52.0 | ≤13.0 | 2.4±0.25 | 0.7±0.15 | 1.22 |
Technical Data
| Property | Test Method | Standard |
| Tensile Strength(MPa) | ASTM D2671 | ≥10.4 |
| Elongation | ASTM D2671 | ≥300 |
| Tensile Strength after Aging(MPa) | UL224 158℃*168hrs | ≥7.3 |
| Elongation after Aging(MPa) | UL224 158℃*168hrs | ≥200 |
| Dielectric Strength(KV/MM) | IEC243 | ≥15 |
| Volume Resistivity(Ω.cm) | ASTM D876 | ≥1*1014 |
Hot Melt Adhesive Property
| Property | Test Method | Standard |
| Water Absorption | ASTM D570 | ≤0.2% |
| Softening Point | ASTM E8 | 95℃ |
| Strength of Pearing(PE) | ASTM D 1000 | 120N/25mm |
| Strength of Pearing(AL) | ASTM D 1000 | 80N/25mm |
Color: Standard color is black (other color available upon request).
Waterproof Adhesive-Lined Polyolefin Heat Shrink Tubing Heat Shrink Tube
