Active Member
|
[China]
Address: Sunbow Industrial Park, 2nd Industrial Zone, Xiacun Community, Gongming , Guangming New District, Shenzhen 518106
Contact name:Chris
Shenzhen Sunbow Insulation Materials MFG. CO., LTD |
|
|
GLASS FIBRE SILICONE WIRE SLEEVING SILICONE FIBERGLASS SLEEVING
Max Temperature Rating: 200ºC,
Max Working Voltage: 600V
Silicone Rubber Fiberglass Sleeving SB-SGS-70: Non-Alkali Fiberglass Braided, then coated with silicone resin and treated in high temperature.
Standard Color: White, black, red, yellow, green, brown or rust red or Oxide red, blue, grey etc
Breakdown Voltage:7.0KV
Technical Data:
| Item | Performance | Note | |
| Dielectric breakdown voltage KV AC | Minimum average | ≥7.0 | Before aged |
| Minimum single point | ≥5.0 | ||
| Minimum average | ≥3.5 | 6 HRS* 245±5ºC 245±5ºC 6HRS Aging | |
| Minimum single point | ≥2.5 | ||
| No breakdown | / | 1 KV IN 2% Salt water | |
| Thermal endurance | No indication of crack | OK | 1440 HRS* 235±5ºC 235±5ºC 1440HRS Aging |
| Fire resistance | VW-1 | OK | UL 1441 |
SB-SGS-70 sleeving with its good dielectric strength, flexibility and flame retarding properties make it high performance qualities. It can be widely used in insulated or partially insulated conductors, bus bars, component leads, or assemblies of electrical components etc.
| Inside Diameter | Wall thickness (mm) | Standard package (m/roll) | |
| Nominal (mm) | Tolerance (mm) | ||
| φ0.5 | +0.2, -0.1 | ≥0.37 | 200 |
| φ1.0 | +0.2, -0.1 | ≥0.37 | 200 |
| φ1.5 | +0.2, -0.1 | ≥0.37 | 200 |
| φ2.0 | +0.2, -0.1 | ≥0.37 | 200 |
| φ2.5 | +0.3, -0.1 | ≥0.42 | 200 |
| φ3.0 | +0.3, -0.1 | ≥0.42 | 200 |
| φ4.0 | +0.3, -0.1 | ≥0.42 | 200 |
| φ4.5 | +0.3, -0.1 | ≥0.51 | 100 |
| φ5.0 | +0.3, -0.1 | ≥0.51 | 100 |
| φ6.0 | +0.3, -0.1 | ≥0.51 | 100 |
| φ7.0 | +0.3, -0.1 | ≥0.56 | 100 |
| φ8.0 | +0.3, -0.1 | ≥0.56 | 100 |
| φ9.0 | +0.3, -0.1 | ≥0.66 | 100 |
| φ10.0 | +0.3, -0.1 | ≥0.66 | 100 |
| φ12.0 | +1.0, -1.0 | ≥0.66 | 50 |
| φ14.0 | +1.0, -1.0 | ≥0.66 | 50 |
| φ16.0 | +1.0, -1.0 | ≥0.66 | 50 |
| φ18.0 | +1.0, -1.0 | ≥0.66 | 50 |
| φ20.0 | +1.0, -1.0 | ≥0.76 | 25 |
| φ25.0 | +1.0, -1.0 | ≥0.76 | 25 |
| φ30.0 | +1.0, -1.0 | ≥0.76 | 25 |
