KY-308 Silicone Oil Emulsion Single Component for polyester three-Dimensional staple Fiber

KY-308 Silicone Oil Emulsion (Single Component ) for polyester three-Dimensional staple Fiber

KY-308 Single component silicone emulsion for polyester steple fiber (three-dimensional hollow curly)- finishing agent

1,Product characteristics

KY-308 is our newest single component silicone oil emulsion for polyester steple fiber,KY-308 contains many of the faculties groups, it can  make the polyester fiber excellent fluffy, rebound resilience, smooth, soft, good handling feeling and high anti-static characteristics, the hollow fiber will be more white and bright after using the finishing agent.

2,the main technical index                             

1,appearance:               milky white liquid

2,solid content(%):        58-60

3,ionic character:           non-ionic

3,Working liquid component:    

dilute KY-308 silicone oil emulsion with water: 

Suggested working liquid concentration rati0

 (original products: water)                              1:8 ~ 20

Oiling rate %                                         0.3- 0.6

4,working liquid compounding method

1) according to the concentration and the proportion of the total amount of the expected liquid, calculate the weight of KY-308 and water,

2) pouring the needed amount of water into the kettle and startmixing, then pouring the weighted Ky308 and stir them about 15 minutes to dispersed evenly,

3) stopping mixing and storing the working liquid in storage tank for using,

4) heating is not needed during the working liquid preparation, room temperature water is advisable,

5) preparated liquid should be used during 12 to 24 hours.

5,oiling way

The finishing agent using the spray or the combination of dipping and spraying oiling method, either of them can achieve satisfactor finishing effectation.

6, the fiber heating setting process requirement

Oiled curly tow, short fibers must to be done heating setting processing. Suggesting temperature 150 ℃ ~ 170 ℃, retention time 10 min ~ 15 min, of course, concrete process parameters determined by fiber manufacturers.

7,the product security,

no bad reaction to human skin in using procession, but please wash with a lot of clean water if it splash into eyes.

8, packaging and shipping quality

1), with 50 L or 200 L clean airtight plastic packaging,

2), stored in a ventilated shady and cool place, storage temperature 0 ~ 35 ℃. Storage period for half a year,

3), according to the non-dangerous goods shipment.