Home Companies Shenzhen Greetwin Technology Co.,Limited

IP63 Digital Device To Block Mobile Phone Signal Isolator Remote Monitoring

Active Member

Contact Us

[China]

Contact name:Albert

Shenzhen Greetwin Technology Co.,Limited

IP63 Digital Device To Block Mobile Phone Signal Isolator Remote Monitoring

Country/Region	china
City & Province	shenzhen guangdong

Product Details

IP63 Digital Device To Block Mobile Phone Signal Isolator Remote Monitoring

Especially for prisons and other large sensitive locations such as military or governmental compounds.

It can also use in Oil and Gas Storage Facilities and fields, Security Services, Military Units, Secret Services, Museums, Facotry, Border Patrol and Drug Enforcement, Customs, etc. – Remote PC control with software to Turn on each jammer, each band or the whole jammer system ON/OFF, VSWR Alarm in a wireless setup (RF module). Each unit offers a key lock support & mounting hardware.

Digital noise technology jamming range is very high, 5 times stronger than VCO technology jammer.

Digital Gaussian white noise is essentially a pseudo random signal, signal characteristics consistent with a random function. Strong Anti-interference ability, there is no need high power interference radiation power, influence and damage to the electromagnetic environment is very small, can bear long distance loss. Long-term cases, interference stability. Mechanism causes due to interference, interference by external environment (such as wind, rain, ice, variations on space) change is not obvious.

The Prison Jammer GW-J800DNW manages the problem of illegal cell phones in a Prison or Government facility. Prison Solutions from government stop smuggled phones from making calls by using RF Jammers.

Our solutions are good at operation and design. Prison Jammers work to block off large areas in a building to stop cell phone calls. These Prison Jammers are installed in a pre-determined pattern.

Using digital Gaussian white noise technology for Maximum performance. Will cut-off all Cellular Communication between Mobile Phones and Cellular cells.

The Jamming Radius depends on the strength of the signal in given area. All Cellular Mobile Devices will be totally BLOCKED, and will not be able to receive or dial outgoing calls. the cell phone display will show "NO SERVICE".

Technical Specification,

Output interface	Description	Shield band of frequency		RF output power( +1dBm)
CH1	GSM850	851-894 MHz		46dBm
CH2	AWS 1700	2110-2155 MHz		46dBm
CH3	GSM900	925-960 MHz		46dBm
CH4	PCS 1900	1930-1990 MHz		46dBm
CH5	WIFI, 2.4G	2400-2485 MHz		43dBm
CH6	LTE 2300	2300 - 2400MHz		46dBm
CH7	CDMA450	460 - 470 MHz		46dBm
CH8	LTE700	758 - 803 MHz		46dBm
Power supply: AC220V, or 110V
Total Output Power: 300Watt
Power consumption:1000Watt
Weight: 65Kg Size(length × wind × high):720×490×240mm
Humidity: 5%-95% Running Temperature: -20℃ to +55℃
Cooling System			Systematic Smart Cooling System
System Protection			VSWR, temperature
Jamming Source			Digital Gaussian white noise technology
Antenna Type			High Gain Directional Panel Antennas
Number of Antennas			3
Jamming range: 100-600m according to signal density of mobile network

Mobile Phone Signal There are 3 types RF Jammers.
1. VCO(voltage controlled oscillator) Technology
2. DDS (Direct Digital Synthesis)Technology
3. Pseudo random digital Gaussian white noise technology.

General speaking,
1. VCO(voltage controlled oscillator) Technology
Requirements for the jamming range is not high, extremely sensitive civilian consumption levels of low cost, but efficiencies are not very strict scene.
2. DDS (Direct Digital Synthesis)Technology
Requirements for the jammer need wideband frequency range, and choose different frequency range, such as 20-3000MHz NO gap jamming.
3. Pseudo random digital Gaussian white noise technology.
Requirements for the jamming range is very high, can accept high cost, national security and military, have strict requirements for jamming range.

Mobile Phone Signal Features:

High-power multi-band jammer, make high jamming range
Modular construction for easy maintenance, repair and upgrade.
Max 300watts total RF output power.
Special additional housing for all weather protection.
The general design of the system meets military requirements.
Different frequency band can be controlled independently by single switches;
Power Amplifiers protection design ensures the working reliability of the device.
(Optional)Can customize these frequencies AM, FM, VHF, UHF, 450MHz, iDEN, CDMA, GSM, GPRS, DCS, PCS, AWS, WCDMA, LTE 700, LTE 800, LTE 2300, LTE 2600, GPS, WIFI, WIMAX, etc.

Mobile Phone Signal Advantages:
1. VSWR protection,

When there be antenna disconnect, full system will not burn out.
2. Waterproof Level: IP63
Good cooling system, Continuous operation, even in hot climates.
3. Stable capability, cost-effective choice
4. Each channel can be controlled separately and simultaneously.
Manual adjustable output power with each channel.

allow the total blockade without interference of the people who live outside the perimeter of the prison.
5. Remote Monitoring(Optional)
Remote Monitoring available by Ethernet Network
Remote Control Interface: RJ45

Provide a system (software and hardware) that allows the authorities to supervise the operation at 100% of the blocking system.

6. Small influence to the electromagnetic environment.

Comply with the maximum power allowed for non-ionizing radiations that affect the health of people.

Mobile Phone Signal Application
Prisons, military, government, Oil and Gas Storage Facilities and fields, Churches, Theatres, News Conference Rooms, Libraries, Museums, Courts, Border Patrol and Drug Enforcement, Customs, mosques, etc.