Wuxi Octetally Tech Co., Ltd |
Verified Suppliers
|
|
Recycling Industry Heavey Metal And Plastic Crusher Machine Hard Blade Shredder For Car
Product Description:
Metal Plastic Crusher Machine is a kind of hard blade shredder for car. It is suitable for crushing various metal and plastic materials. This machine has the advantages of simple structure, reliable operation, and low cost, so it is widely used in recycling industry.
Product Features:
The double-shaft shredder is a mechanical equipment specially used
to process various waste materials. Its working principle is to use
the rotational force of two main shafts to tear and crush
materials. When the material enters the dual-shaft shredder, the
blades on the two main shafts will rotate in opposite directions to
sandwich the material in the middle and tear it. As the main shaft
rotates, the materials are gradually broken into smaller particles.
The double-shaft shredder is efficient, stable and reliable, and
can handle various types of waste materials, such as waste
plastics, scrap metal, waste paper, etc. Its working principle is
simple and easy to understand, easy to operate, and can greatly
improve the efficiency of waste processing. At the same time, the
double-shaft shredder is also energy-saving and environmentally
friendly, which can reduce the accumulation and pollution of waste
materials and contribute to environmental protection.
Parameters | Model OPS-400 |
Motor | 4KW |
Gearbox | JL3#-12 |
Input rotation | 12rpm |
Input torque | 2919Nm |
Shaft | Φ60 |
Blade | Φ180*15,9CrSi |
Blade nos | 26pcs |
Inlet size | 600*500*300mm |
Outlet width | 420mm |
Outlet height to floor | 200mm |
Overall size | 1160*600*1450mm |
G.W | ≈500kg |
Capacity: | 110-130kg/h |
Applications | Light metals, plastics, kitchen wastes, wood, paper, etc. |
Working principle of double shaft shredder:
The working principle of the double-shaft shredder is mainly to crush and tear materials through the rotation and shearing action of the two main shafts. When the material enters the double-shaft shredder, the two main shafts rotate at different speeds, forming rotational force and shearing force, causing the material to be crushed by extrusion, shearing and friction between the two main shafts. into small pieces.
Specifically, the main shaft of a double-shaft shredder is usually
made of high-strength materials, such as high manganese steel,
alloy steel, etc., which have high hardness and wear resistance.
When the main shaft rotates, the friction between the material and
the main shaft causes the material to be torn, while the gap
between the main shaft causes the material to be squeezed. At the
same time, the speed difference between the two spindles also
causes the material to be sheared.
In addition, the double-shaft shredder is also equipped with
auxiliary devices such as blades and screens to further crush and
screen materials. The blade can increase the friction between the
material and the main shaft and improve the crushing effect; the
screen can control the discharge granularity of the material to
meet different needs.
FAQ:
Q:Could I have prices of your products?
A:Sure. Please feel free to send us an email here. You will get our
reply in 24 hours
Q:How about the quality of machines?
A:Our machines adopt advanced technology. Moreover, we carry out
strict supervision during productionand make sure every finished
product with high quality.
Q: Do you inspect the finished products?
A:Yes, each step of production and finished products will be came
out inspection by QC department before shipping.