1.5mm-2mm Steel Frame Roll Forming Machine Cast iron

Gearbox Drive Cast Iron Structure hydraulic Punch Galvanized Steel Scaffolding Plank Roll Forming Machine

Steel scaffold(scaffolding plank roll forming machine/ strut channel bending machine) is a type of construction equipment for the building industry. It can be generally referred to as steel scaffold plate, construction steel skips, steel treads, galvanised steel skips, hot-dip galvanised steel treads, and is popularly used by the shipbuilding industry, oil platforms, electricity, and the construction industry. The steel springboard has M18 bolt holes for connecting the plate to the plate and adjusting the width of the bottom of the platform. Between the steel springboard and the steel springboard, a skirting board with a height of 180mm is used. The skirting board is painted in black and yellow and the skirting board is fixed with screws in the respective 3 holes. In this way the steel skirting plate can be fixedly connected to the steel skirting plate. After the connection is completed, the materials used to make the platform should be strictly accepted as a gatekeeper, and the platform should be tested after it has been made. The installation is completed and acceptance is qualified and listed before it is put into use. (steel scaffold board roll forming machine/steel scaffold board bending machine)

Flow Chart Of Scaffolding Plank Roll Forming Machine

5T deoiler with leveler-Embossing machine-Roll forming machine-Flying cut to length-Outer table

Main Technical Parameters

Pictures of Scaffolding Plank Roll Forming Machine