Steel Stud Drywall Roll Forming Machine 0.4-0.8mm Galvanized Steel

Metal Stud Profile Furring Channel Main Channel Roll Forming Machine

Light steel keel(celling system roll forming machine) is a metal skeleton for construction made of high quality continuous hot-dip galvanised sheet and rolled by cold-forming process. It is used for the decoration of non-load-bearing walls and building roofs finished with lightweight panels such as paper-faced gypsum board and decorative gypsum board. It is suitable for the decoration of roofs of many kinds of buildings and as a base material for the internal and external walls and scaffolded ceilings of buildings. There are ceiling keels(celling system roll forming machine) and partition keels(drywall system roll forming machine) according to their use, and V-, C-, T- and L-shaped keels according to their cross-sectional form. Ceiling keel is divided into: main keel(main channel roll forming machine) and secondary keel(celling channel roll forming machine). The main keel(main channel roll forming machine) is the keel that carries the weight of the ceiling.

Flow chart of two profiles one machine:

Manual decoiler--Guiding--Guiding--Troll forming--Hydraulic cut--Out table

When a machine only produces STUD a version, then we can achieve a machine to produce 2-3 sizes, such as C90, C60, C120 so that three sizes can be achieved on this machine, then the casing size is 30mm respectively. after cutting with three scissors can be. Changing sleeves is a common manual way, economical and suitable for 1-3 sizes.

Pictures of stud and track roll forming machine: