Active Member
|
[China]
Address: No. 1, Xingyuan Road, Gu Shan Town, Jiangyin city, Jiangsu Province, China
Contact name:Emma Teng
Jiangyin Dingbo Technology Co., Ltd |
|
|
380 voltage CE Approved steel forming machine / cold roll forming
machine
Main components brand
| Inverter | YASKAWA |
| PLC | Siemens |
| Encoder | Omron |
| Touch screen | MCGS |
| Other electrical appliances | Schneider |
| Servo motor | YASKAWA |
Technical parameter:
| Name | Item | Specification |
| Coil requested | Material | Color steel, galvanized steel |
| Thickness | 0.3-0.7mm | |
| Tensile strength | 235Mpa | |
| Decoiler(1 unit) | Type and weight capacity | Manual decoiler, 5T |
| Inner diameter | 498-508mm | |
| Outer diameter | Max:1800mm | |
Rollforming machine | Rolling speed | 15m/min |
| Motor | 7.5KW, 3phase, 60Hz, 380V | |
| Rolling step | 17 | |
| Driving system | Chain transmission | |
| Structure of machine body | Entire wall steel structure | |
| Material of roller | 45# steel, chromed thickness0.05mm | |
| Diameter of shaft | 80mm | |
| Dimession | Abt.13m*1.8m*1.6m | |
| Weight | Abt.13T | |
Electric control cabinet | Main component | PLC, frequency convertor, touching screen, encoder |
| Cutting and length measurement | Automatic stop to cut, encoder | |
| Brand | From Japan, can be chosen by client | |
| Hydraulic station (1 unit) | Power and strength | 3.5KW, 16Mpa |
| Cutting machine(1 unit) | Material of blade | GCr12 mov steel, heatment and hardness up to HRC58-62 |
| Cutting type | Hydraulic cutting | |
Run out table | Size | 1.2m*0.7m*1.2M |
Features
This producing line uses galvanized steel sheet, colored armor
plate or aluminum plate as the
material plate.
The products of it are used as the roof tile and wall panel outside
of building, to increase the
beauty and durability of the roof tile and wall panel. This line
has no limit on processing length; you
can set several different data on the computer control cabinet
according to your own need. After
pressing the button "Confirm", the machine can produce the panel
automatically according to the
set data. The molding plate surface smooth and not easy to be
marked when it is being stamped.
So it is easy to install.
The product conforms to National Steel Construction Building
Standard.
Working flow:
Manual decoiler----Feeding&guiding----Rollforming----hydraulic
cutting----Run out table
Machine Show
