Active Member
|
[China]
Address: No. 1, Xingyuan Road, Gu Shan Town, Jiangyin city, Jiangsu Province, China
Contact name:Emma Teng
Jiangyin Dingbo Technology Co., Ltd |
|
|
Specification
| 1. | Raw Material | : | Pre-painted galvanized steel sheet. ASTM A 526 / JIS G 3302 SGCC, Tensile strength 220 ~ 350MPA or other same class of soft material. |
| Coil Thickness | : | 0.75 ~ 1.5mm for TR150/280mm | |
| : | 0.6 ~1.0mm for deck 55/158mm | ||
| Coil Width | : | According to required profile type | |
| 2. | Producing line speed | ||
| Line speed | : | Max.15m/min | |
| ( In case of longer than 5 meter ) | |||
| For higher speed, it is available with option. | |||
| Speed control | : | Frequency control by inverter | |
| 3. | Electric power source | ||
| Commercial voltage | : | According to customer’s specification | |
| Total power | : | 40Kw | |
Introduction
This Roll forming machine for deck plate is manufactured based on the world’s top technology and experiences, and the Roll forming machine for deck plate is equipped with high durability and convenient management. Deck plate panels produced by the equipment are using the steel coils (0.8 ~ 1.6mm Thickness) and efficient for the reinforcement of strength during placing concrete, providing with embossed shape to prevent detachment from concrete.
Roll forming machine for deck plate consists of Un-coiler that inputs and releases coil, Pinch Roll Unit that exquisitely inputs coil, Roll Forming Unit that forms the required shape and embossing through multi-stage forming roll, Shearing Unit that cuts fabricated deck plate panel, and Auto Stacking Unit that loads completely cut deck plate panels.
Profiles: Roll forming machine for deck plate
SH-DK-T55
SH-DK-T82
SH-DK-T55
