I Description of the machine
This super span machine is developed by ourselves with
technology similar to ABM MIC-240 forming machine. It is comprised
of mechanical expansion decoiler, straight panel forming unit,
hydraulic mould cutting device, curving panel forming unit, control
system, hydraulic system, run-out racks for straight and curve
panels and all other accessories. All parts are installed on a
mobile chassiss. So it is suitable for site working
II Features
2.1 Rollers are made of good steel, coated with rigid chrone.
2.2 There is an auto-feed device which can feed 0.5-1.5mm color
steel sheets. During production, there is no need to adjust the
gaps between rollers.
2.3 Light and convenient hoist, only 2kg (those from USA is 30kg).
And thus makes quick and convenient installation.
2.4 Large span, high corrugation, high tension strength, nutless,
etc.
2.6 Profile:depends on drawings and on request
III Main technical data
3.1 Mounting dimension: 8900mm x 2250mm x 2300mm
3.2 Total weight: about 11500kg
3.3 Control system: electric control
3.4 Main forming unit driving motor power: 7.5kW
3.5 Curving motor power: 4+1.1+1.1 kW
3.6 Electric cutting motor power: 3kW
3.7 Material of rollers: 45# steel, quenched HRC 58-62
3.8 Material of roller shafts: 45# steel, adjusted
3.9 Material of cutting blade: Cr12
3.10 Step of rollers: 13 steps
3.11 Forming speed: 10000~12000 mm/min
3.12 Max span: 40m
IV Buildup and spares
1. Decoiler for coils
2. Straight panel forming unit
3. Curving panel forming unit
4. Electric control system
5. Electric mould cutter
6. Two manual clamps (for clamping the beginning seam lock between
two curved panels)
7. Small C chanel bending machine
8. Lifting clamps, 8 sets
9. Lifting steeve, two pieces
10. Lock seaming machine
11. Run-out racks for straight panel and curving panel: each 8 pcs
enough for 36m span
12. Bearings for roller stands of straight panel forming mschine:
two pieces
13. Driving chains: two pieces
14. Hand scissors: one piece (for cutting beginning terminal of
color coils)
15. Hand clamps (for clamping curved panels to let seamer seam two
panels together): 4 pieces
16. Wrench: one piece
17. Operation manual and CD
