Active Member
|
[China]
Address: No. 1, Xingyuan Road, Gu Shan Town, Jiangyin city, Jiangsu Province, China
Contact name:Emma Teng
Jiangyin Dingbo Technology Co., Ltd |
|
|
Building Material Steel Wall Panel Roll Forming Machine With Hydraulic Station
Brief introduction
Main parameters of Steel Wall Panel Roll Forming Machine
| High Speed Blue Double Layer Roll Forming Machine For Roof Cladding | ||
|---|---|---|
| 1 | Suitable material | Color steel sheet ,galvanized steel sheet, aluminium sheet |
| 2 | Width of material | 1219mm or as you required |
| 3 | Thickness of material | 0.3-0.6mm or as your needs |
| 4 | Working speed | 10-20m/min |
| 5 | Main motor power | 4kw with cycloidal reducer |
| 6 | Hydraulic station power | 4kw |
| 7 | Electrical control system | PLC control system |
| 8 | Shaft diameter | 70mm |
| 9 | Roller station | 17 rows |
| 10 | Material of roller | High grade 45# forged steel plated with hard chrome plating |
| 11 | Material of cutting | Cr12 mould steel with quenched treatment |
| 12 | Voltage | 380V 3phase 50HZ or as the customer's requirements |
| 13 | Dimension | 8200x1500x1510mm |
| 14 | Weight | About 3.4 T |
| 15 | Working time | Can be 24 hours |
| 16 | Workers | 1-2 Only |
Size opption
| NO. | Model | Width | Thickness | Cover Width(mm) | Host Size(L*W*H) | Power(kw) |
| 1 | 24-210-1025 | 1200 | 0.4-0.8 | 1025 | 7*1.6*1.3 | 4 |
| 2 | 28-207-1035 | 1200 | 0.4-0.8 | 1035 | 8*1.3*1.2 | 4 |
| 3 | 25-195-780 | 1000 | 0.3-0.8 | 780 | 8*1.3*1.2 | 4 |
| 4 | 35-253-760 | 914 | 0.3-0.6 | 760 | 7.5*1.3*1.2 | 5.5 |
| 5 | 28-220-1100 | 1250 | 0.3-0.6 | 1100 | 8*1.5*1.2 | 4 |
| 6 | 40-256-768 | 914 | 0.3-0.6 | 768 | 9*1.3*1.2 | 5.5 |
| 7 | 23-205-820 | 1000 | 0.4-0.8 | 820 | 8*1.5*1.3 | 5.5 |
| 8 | 30-190-950 | 1200 | 0.3-0.8 | 950 | 8.5*1.5*1.3 | 5.5 |
| 9 | 35-190-760 | 1000 | 0.4-0.8 | 760 | 9*1.5*1.3 | 5.5 |
Main Equipment
This kind of tile forming machine consists of a manual decoiler,
feeding platform, main molding core, shearing mechanism, hydraulic
station, computer control cabinet, step-pressed mechanism, high
precision counter and driven system protective covering panel
supporting table.
Flow Chart of the Tile Roll Former
Decoiling-active feeding - Roll forming--Step press -Measuring
length-cutting to length-product to stand.
Machine Placement and Operator
The tile forming machine should be placed on an even cement floor
and lifted by a lifting device with a lifting capacity not less
than five tons. It requires space for storing materials and laying
the machine and room to operate the machine. In addition, this roll
forming machine requires one operator and one porter. The
temperature in the workspace should be no less than -14℃.
Machinery Photos
Refered Profile drawing photo
