Industrial Roller Shutter Door Forming Machine High Security 11KW
Roller Shutter Door Forming Machine introduction
- Roller shutter door forming machine is configured with PU injection
or without PU injection.
- It can make roller shutter doors with high security and is also
used for manufacturing rolling fire doors, rolling steel doors,
fire doors and other door products.
- Our machine adopts advanced technology and is designed by
- Therefore, the machine has high efficiency and good working
Roller shutter door forming machine is able to produce rolling fire
doors, storm doors, rolling steel hurricane doors, smoke doors,
air-leakage doors, counter shutters, insulated doors, rolling sound
doors, insulated fire doors and other doors.
This kind of machine is provided with PU injection or without PU
We can customize the machine if you have special requirements. We
promise our product quality is high and the price is
Roller shutter forming machine is widely used for
producing products used in industrial and commercial fields, retail
areas, airports, hotels, institutions, malls and shopping centers.
It is designed especially for manufacturing dock doors,
distribution outlets, food concession stands and other
1. Roller shutter door forming machine is configured with domestic
brand or Italy brand PU online foaming facility.
2. It has double head uncoiler help to increase coil
3. The straightening device can be adjusted to decrease the twist
or curve distortion caused in process of roll forming.
4. The sufficient rolling stations guarantee a perfect profile
5. Roller shutter door forming machine adopts PLC and inverter
6. Non-stop shearing adopted can increase working efficiency.
Technical Specifications for Roller Shutter Door Forming Machine
1. PU injected roll shutter door machine
1.1 Steel coil thickness: 0.3-0.5mm
1.2 Steel coil width: 117-310mm
1.3 Rolling stations: 41
1.4 Main motor power: 11KW
1.5 Total weight: approximately 12 Ton
1.6 Working speed: 20-28m / min
Parameter of Single sheet roll shutter door machine
|1||Suitable material||Type||Galvanized steel||-|
|Yield Strength (Mpa)||450-550||-|
|2||Forming Speed (m/min)||About 20-25||exclude cutting time|
|3||Forming main motor power(KW)||3*6||Depend on final design|
|4||Main machine Hydraulic station power(KW)||5.5||Depend on final design|
|5||Total power||23.5||Depend on final design|
|6||Power||AC415V, 50Hz, 3 Phase||As per customer|
|7||Dimension (L×W×H , m)||20×3×1.5||Depend on final design|