Polyurethane Sandwich Panel Machine , Automatic Continuous Roller Shutter Forming Machine

Main Technical Specifications for Sandwich Panel Roll Forming Machine

Sandwich Panel Spec.

pu rolling shutter machine price , roller shutter door machine , rolling shutter strip making machine

Introduction of Rolling Shutter Door Roll Forming Machine, Roller Shutter Door Roll Forming Machine:

The line consists of decoiler, sheet guiding equipment, roll forming section, cutter, supporter, hydraulic system, control system. The roller shutter which made by this machine have neat external appearance, even ripples, high utilization and strong strength.

Description:

We design the new model which can joint two shutters without traditional clips. This solution not only save the cost for buying a door accessory, but also speed up the door construction. It can be designed to produce any profile which according to customers’ requirements. Customers can select to add the in-line punching holes device or not. Whole production line is driven by hydraulic system and controlled by PLC with touch screen.

We are not only offer customers a wonderful machine for making, but also the abundant experience, precision making, stable automatic manufacture by hydraulic power, hi-tech control system, and our enthusiasm.

PU finished products

Specifications:

1. Thickness of Forming Sheet: 0.6 ~ 1.2 mm.
2. Forming Speed: 12 ~ 16 M/min.
3. Roll Shaft Diameter: 40 mm Dia.
4. Hydraulic Motor: 7.5 HP ~ 10 HP
5. Roll stands: 10 ~ 12sets of roll in SK2-hard chrome coated.
6. Attached with cooling equipment.
7. Complete with uncoiler, hydraulic cutting device and including run-out table.
8. This machine is controlled by computer system with touch screen.

Features:

Professional designing for manufactures shutter steel.
Automatically continually manufactures high quality product with PLC.
Easy operation: Directly Input the data on the touch screen.
Customers decide the profile of products.
Saving time and cost owing to high speed running with hydraulic system.
One year warranty.

Composition of the equipment:

Cold Roll Forming Machine (1 set)
Manual Type Uncoiler ( 1set)
Rear-Cutter (1 set)
Pre-Cutter (Option)
Coil Car (Option)
Product Stacker (Option)
Safety Guide (Option) – emergency stop wire, PVC cover…etc

Features (rock wool sandwich panel):

1) Rock wool is non-combustible material, so the rock wool panel has good fire resisting proper

The test shows the temperature of the panel fire-proof is as high as 10001°C
2) Roof and Wall panel thickness 100 REI 120
3) Roof and Wall panel thickness 80 REI 60
4) Roof and Wall panel thickness 50 REI 30
5) The roof and wall panels, thickness 50-80-100mm, were classified 0/1 for reaction to fire.

(Materials are assigned a class from 0 to 5, the higher the class, the higher the degree of combustion)
6) Rock wool panel achieves a notable reduction in air borne sound transfer

particularly when specifying a perforated liner.The impact of rain and hail on

the metal sheet, a problem on most standard constructions is greatly reduced

when adopting CX-RW panels.

The CX-RW panel in thicknesses of 50-100mm
with 100kg/m3 rock wool fibre insulation has achieved results of RW=29-30dB 100kg/m3

 

Continuous sandwich panel production line

• PU sandwich panel line
• Mineral wool sandwich panel line
• PF sandwich panel line

 

ØElectrical industry roll forming machine

 

 

A. 1. Electric cabinet pillar roll forming machine

2. Trench type cable tray roll forming machine

3. Echelon type cable tray roll forming machine

4. Tray type cable tray roll froming machine

 

B. 1. Bottom plate of stereo garage roll forming machine

2. Rim of stereo garage roll forming machine

 

 

ØSteel structure roll forming machine

 

A. Decking floor roll forming machine

 

B. Glazed tile roll forming machine

 

C. Roll forming machine for wall and roof panel

 

D. C,Z purlin roll forming machine