Active Member
|
[China]
Contact name:Eason
WUXI HENGRUIYANG INTERNATIONAL CO., LTD |
|
|
Trunking Cable Tray Roll Forming Machine
Main features
This Trunking Cable Tray Roll Forming Machine are designed to produce the different sizes with automatical adjusting. Forming machine is combined and adjustable, one set of combined rollers complete all cable tray products. Steel Cable Trunking is an economical wire management system designed to support and protect electrical wires and cables.
Cable trays are strong, versatile and easy to install, its excellent performance characteristics combined with a visually appealing profile has made it the highest regarded tray product in the electrical industry. For general use inside, with a clean looking finish, the tray is offered in pre-galvanized steel.
Working flow
Decoiling the sheet----------- Sheet guiding---------Leveling sheet-----------Punching Holes ----------Measuring length---------Cutting the sheet------------Roll forming the panel-----------Panels to the support
Technical parameters
| Main Technical Parameters | |||
| Item | Parameters | Notes | |
Suitable Material | Type | Steel Sheet | |
| Thickness(mm) | 0.8—2.5 | ||
| Yield stress | 345 Mpa | ||
| Product Specfications | Width | 100~600 | Detail as the client's drawing |
| Length | Any Length | ||
Power Requirement | Type | 380V/3PH/50HZ | |
| Main Motor Power(KW) | 22 | Depend on actual design | |
| Motor for Adjust Width | 3 | Depend on actual design | |
| Hydraulic Power(KW) | 7.5 | Depend on actual design | |
| Forming Speed(m/min) | 10m/min | Not include the time of punching and cutting | |
| Forming Stand | 20 | Depend on actual design | |
| Type of Cutting | hydraulic cutting | ||
| Control System | Mitsubishi PLC and inverter | ||
Machine components
| S.N | Equipment name | Quantity |
| 1 | 5T hydraulic un-coiler | 1 set |
| 2 | Coil Levelling device | 1 set |
| 3 | Hydraulic Punching | 1 set |
| 4 | Hydraulic Pre-cutting | 1 set |
| 5 | Main roll forming machine | 1 set |
| 6 | Hydraulic station | 1 set |
| 7 | Control system (including PLC control box) | 1 set |
| 8 | Output tables | 2 units |
| 9 | Spare parts | 1 package |
Machine picture
Profile drawing
