Active Member
|
[China]
Address: No.18, GaoYun Rd, BinHu District, Wuxi City, Jiangsu Province, PRC
Contact name:Gussi Wong
S&G Engineering Solution Lmt. |
|
|
Chain Driven Cold Rolled Steel Cable Tray Roll Forming Machine,cable tray ladder type roll forming machine
Company Introduction
S&G is prefessional making different kinds of the roll forming machine.
we have more than 10 years experience in making the roll forming machine.And our machine is customized made according to customer's sheet profile drawing. We have a strong enginner team to design the machines for you! And we also own a strong and mature after sales service team to offer you any service to help you with your sheet production by our roofing machines.
Equipment struction introduction.
This production line may produce the cable tray, the different sizes through the replace punching moulds to complete. Forming machine is combined and adjustable, one set of combined rollers complete all cable tray products, the change size through adjust distance of rollers to complete.
3, Function: material feeding
Feature: uses the servo motor-driven .Multistage type feeding: May
input 10 group of different feeding lengths, The liquid crystal
touching screen demonstrated is advantageous for the change,
establishes various technical parameters. The auto-induction start
system and the punch press linkage (control punch press start).
Type of Punching Press: JF21-200
Punching Press: uses the steel plate welding fuselage, the rigidity
is strong with good appearance. Uses the combined type air operated
friction clutch.
Type: hydraulic cutting
Punching mould is located end of hole punching section, it is
separate operation device, the servo-feeder to position the length
and cutting. The material of cutting blade is Cr12MoV, can the
working piece without burr and also have the feature of easy change
and long service life.
Technical parameters
No. | Part Name | Type of Equipment | Qty (set) | Approximate Weight(T) | Motor Power(KW) |
1 | Decoiler | 1 | 4 | 7.5+3 | |
2 | Leveler | 1 | 2 | 11 | |
3 | Serve Feeding Machine | 1 | 1 | 7.5 | |
4 | Punching Press | 1 | 31 | 37 | |
5 | Combined Punching Die | 100/200/600 | 3 | 0.5 | |
6 | Hydraulic Cutting Machine | 1 | 1.5 | 4 | |
7 | Automatic Feeding Table | 1 | 2 | 1.5 | |
8 | Main Forming Machine | Automatic double hanger type forming frame, Automatic change width
of cable tray | 1 | 28 | 22 |
9 | Collection Table | 1 | 1 | ||
10 | Electric Control System | pressure 0.-0.7MPa.,flow 0.5M3/min | 1 | 0.1 |
| Name | Model | Quantity | Discription |
| 1.Decoiler | Cantilever model 5T | 1 set | Cantilever,hydraulic,passive decoiling, with pressing arm and coil car. |
| 2.Roll forming system | Leveler | 1 set | Roller material:GCr15 steel being heat treatment, with digital-controlled procession, which ensures the rollers’ hardness to be HR60 and durable Shaft:#45 steel roller stands:column Motor drive,with chain connection&gear. Cr12 mould steel with quenched treatment 500T hydraulic presser,press at speed of 20 times /min,Power 30KW, with 16sets of mould
|
| Punching | 1 set | ||
| Pre-punching system | 1 set | ||
| Servo feeder | 1 set | ||
| Guiding device | 1 set | ||
| Clamping roll | 1 set | ||
| Roll forming system | 1 set | ||
| Post-cutting system | 1 set | ||
| 3.Out put system | Supporting table | 2 sets | |
| 4.Hydraulic system | 1 set | The decoiler and main roll former share one station, presser use another station. | |
| 5.Electrical system | 1set | 1.PLC control,Encoder set length 2.interface:touchpad+button 3.AC inverter | |
After-sales service
Technical Support
Fully providing technology supports both within and after the warranty period. Feed back to our customers at the first time.
Spare Parts
Promptly providing spare parts and wearing parts.
Upgrade
Improve technology and upgrade of equipments.
Machine Picture:
