Moduleland Technology Co., Ltd. |
|
1. Features:
APD Receiver
Up to 1.25Gb/s Data Links
Hot-Pluggable
Duplex LC connector
Up to 160km on 9/125μm SMF
1550nm DFB laser transmitter
Single +3.3V Power Supply
Monitoring Interface Compliant
with SFF-8472
Maximum Power <1.5W
Industrial /Extended/
Commercialoperating temperaturerange: -40°C to 85°C/-5°C to
85°C/-0°C to 70°C Version available
RoHS compliant and Lead Free
2. Applications:
Metro/Access Networks
1.25 Gb/s 1000Base-EZX Ethernet
1×Fibre Channel
Other Optical Links
3. Description:
Moduleland’s TSPL1GF0D Transceiver is a high performance, cost effective module which have a duplex LC optics interface. Standard AC coupled CML for high speed signal and LVTTL control and monitor signals. The receiver section uses an APD receiver and the transmitter uses a 1550 nm DFB laser, up to 38dB link budge ensure this module 1000Base Ethernet 160km application.
4. Optical Parameters(TOP = -40 to 85°C, VCC = 3.135 to 3.465
Volts)
Parameter | Symbol | Min. | Typical | Max. | Unit | Note |
Transmitter Section: | ||||||
Center Wavelength | λc | 1530 | 1550 | 1570 | nm |
|
Spectral Width | σ |
|
| 1 | nm |
|
Side Mode Suppression Ratio | SMSR | 30 |
|
| dB |
|
Optical Output Power | Pout | +3 |
| +7 | dBm | 1 |
Extinction Ratio | ER | 9 |
|
| dB |
|
Optical Rise/Fall Time | tr / tf |
|
| 260 | ps | 2 |
Relative Intensity Noise | RIN |
|
| -120 | dB/Hz |
|
Output Eye Mask | Compliant with IEEE802.3 z (class 1 laser safety) |
| ||||
Receiver Section: |
| |||||
Optical Input Wavelength | λc | 1270 |
| 1610 | nm |
|
Receiver Overload | Pol | -7 |
|
| dBm | 4 |
RX Sensitivity | Sen |
|
| -35 | dBm | 4 |
RX_LOS Assert | LOS A | -46 |
|
| dBm |
|
RX_LOS De-assert | LOS D |
|
| -36 | dBm |
|
RX_LOS Hysteresis | LOS H | 0.5 |
|
| dB |
|
General Specifications: | ||||||
Data Rate | BR |
| 1.25 |
| Gb/s |
|
Bit Error Rate | BER |
|
| 10-12 |
|
|
Max. Supported Link Length on 9/125μm SMF@1.25Gb/s | LMAX |
|
| 160 | km |
|
Total System Budget | LB | 38 |
|
| dB |
|
Note
1. The optical power is launched into SMF.
2. 20-80%.
3. Jitter measurements taken using Agilent OMNIBERT
718 in accordance with GR-253.
4. Measured with PRBS 27-1 at 10-12 BER
1. Warranty
Five years Warranty, three
monthes free exchange and one year free repairing.
2. OEM, ODM are welcome.
3. Free sample will be provided.
Free samples under a certain value are
available,with freight cost collect.
4. Any Inquire is welcome.
Any inquire will be replied within
24 hours.
5. After-sales service.
a. From the beginning of production till
the successful delivery, we will track on time and post you the
status.
b. When the goods arrived, if you have
question after inspection, please feel free to contact us, we'll
provide solution.
Q:
What payment terms do you accept?
A: T/T,L/C at
sight,Western Union are acceptable. Other payment
terms are negotiable.
Q: What is the lead time?
A: For standard products,we keep enough
stock,cqn ship out in 1-3 days after PO confirmation.For big
quantity and special
products,Please check lead time with our sales
representative.
Q:
What are the shipping ways can you offer?
A: For small quantity we ship by Express
like DHL,FedEX,TNT,UPS, EMS etc. For large quantity we
can use airshipment ot
other appointed method by clients.
Q: What euipments can your products be
compatible with?
A: products can be compatible with all
market brand.