Active Member
|
[China]
Address: Lot 49G, Quang Minh Industry Area, Chi Dong Town, Me Linh District, Hanoi City, Vietnam.（Lô 49G, khu công nghiệp Quang Minh, thị trấn Chi Đông, huyện Mê Linh, TP. Hà Nội）
Contact name:Ye
Moduleland Technology Co., Ltd. |
|
|
Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photo-detector
MMF links up to 300m
2wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface
Power Supply :+3.3V
Power consumption<1W
Temperature Range: 0~ 70°C
RoHS compliant
2. Applications:
10GBASE-SR/SW Ethernet
SONET OC-192 / SDH
10G Fibre Channel
3. Description:
Moduleland's SFP-10G-SR is a very compact 10Gb/s optical transceiver module for serial optical communication applications at 10Gb/s. The SFP-10G-SR converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links.
4. Absolute Maximum Ratings
| Parameter | Symbol | Min. | Typical | Max. | Unit |
| Storage Temperature | TS | -40 | +85 | °C | |
| Case Operating Temperature | TA | 0 | 70 | °C | |
| Maximum Supply Voltage | Vcc | -0.5 | 4 | V | |
| Relative Humidity | RH | 0 | 85 | % |
Electrical Characteristics (TOP = 0 to 70 °C, VCC = 3.135 to 3.465 Volts)
| Parameter | Symbol | Min. | Typical | Max. | Unit | Note |
| Supply Voltage | Vcc | 3.135 | 3.465 | V | ||
| Supply Current | Icc | 250 | mA | |||
| Power Consumption | P | 1 | W | |||
| Transmitter Section: | ||||||
| Input differential impedance | Rin | 100 | Ω | 1 | ||
| Tx Input Single Ended DC Voltage Tolerance (Ref VeeT) | V | -0.3 | 4 | V | ||
| Differential input voltage swing | Vin,pp | 180 | 700 | mV | 2 | |
| Transmit Disable Voltage | VD | 2 | Vcc | V | 3 | |
| Transmit Enable Voltage | VEN | Vee | Vee+0.8 | V | ||
| Receiver Section: | ||||||
| Single Ended Output Voltage Tolerance | V | -0.3 | 4 | V | ||
| Rx Output Diff Voltage | Vo | 300 | 850 | mV | ||
| Rx Output Rise and Fall Time | Tr/Tf | 30 | ps | 4 | ||
| LOS Fault | VLOS fault | 2 | VccHOST | V | 5 | |
| LOS Normal | VLOS norm | Vee | Vee+0.8 | V | 5 | |
Note:
1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
2. Per SFF-8431 Rev 3.0
3. Into 100 ohms differential termination.
4. 20%～80%
5. LOS is an open collector output. Should be pulled up with 4.7k – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1. Maximum pull-up voltage is 5.5V.
5. About us
Moduleland locating in Hanoi Vietnam, is a factory based manufacturer of optical transceivers covering
various types widely applied to WAN, LAN, SAN, Fiber Channel, FTTX,
etc.
Office&workshop:
Certificate
1. Warranty
Five years Warranty, three monthes free exchange and one year free repairing.
2. OEM, ODM are welcome.
3. Free sample will be provided.
Free samples under a certain value are available,with freight cost collect.
4. Any Inquire is welcome.
Any inquire will be replied within 24 hours.
5. After-sales service.
a. From the beginning of production till the successful delivery,
we will track on time and post you the status.
b. When the goods arrived, if you have question after inspection,
please feel free to contact us, we'll provide solution.
Q: What payment terms do you accept?
A: T/T,L/C at sight,Western Union are acceptable. Other payment terms are negotiable.
Q: what is the lead time?
A: For standard products,we keep enough stock,cqn ship out in 1-3 days after PO confirmation.For big quantity and special products,Please check lead time with our sales representative.
Q: What are the shipping ways can you offer?
A: For small quantity we ship by Express like DHL,FedEX,TNT,UPS, EMS etc. For large quantity we can use airshipment ot other appointed method by clients.
Q: What euipments can your products be compatible with?
A: Our products can be compatible with all market brand.
Q: How to place an order?
A: 1> Confirm order details with our sales representatives.
2> Proforma Invoice confirmed, the order will be arranged upon receipt of your payment.
3> Confirm shipping details
and dispatch goods,
tracking number will be sent to you promptly
after the shipment is picked up.
4> We will help to track your goods until you receive them safely.
