Active Member
|
[China]
Address: 3rd Floor, Building A10, Qinghu Park, Silicon Valley Power, Longhua New District, Shenzhen
Contact name:
Shenzhen Yajie Environmental Protection Equipment Co.,Ltd |
|
|
Reverse Osmosis Salty Sea Water Desalination Plant , Water Purify Equipment
Seawater Desalination Equipment Performance:
* Auto controller, RO membrane auto flush to protect membrane.
* Auto start when pure water tank have no water.
* Low pressure protection switch to protect high pressure pump when
there is no raw water.
* High efficient and low noise high pressure pump.
* Product water conductivity meter to monitor product water quality
all the time.
* Input water and output water pressure gauge to monitor RO
membrane *differential pressure to remind it's time for chemical
cleaning.
* Inlet water solenoid valve to stop water when machine is stop.
Reverse Osmosis Salty Sea Water Desalination Plant Water Purify Equipment
Seawater Desalination Equipment Details
kyro-4000lpd seawater desalination equipment:
1. Capacity: 4000L/D |
2. Rated power: 4.0KW/H |
3. Voltage: 110V/220V/380V, 50Hz/60Hz, single phase/3phase |
4. Desalting rate:>=98% |
5. Water recovery rate: 30-35% |
6. TDS of raw water: ≤35000PPM |
7. TDS of pure water: ≤750PPM |
Seawater Desalination System Features:
* The design of the entire reverse osmosis seawater desalination
control system is controlled by advanced computer programs at home
and abroad, and a distributed sampling control and centralized
monitoring operation control system is formed by the programmable
controller PLC of the industrial computer operating station.
* Set high and low pressure protection switches and automatic
switching devices according to process parameters. When abnormal
conductance, flow and pressure occur, automatic switching,
automatic interlocking alarm, and shutdown can be realized to
protect high-pressure pumps and reverse osmosis membrane elements.
* Frequency conversion controls the start and stop of the
high-pressure pump, realizes the soft operation of the
high-pressure pump, saves energy consumption, and prevents damage
to the high-pressure pump and membrane elements due to water hammer
or back pressure. The program is designed to realize low-pressure
automatic flushing before and after the reverse osmosis device is
turned on and off.
* Especially during shutdown, the meta-stable state of concentrated
seawater will transform to precipitate and pollute the membrane
surface. Automatic flushing of low-pressure desalinated water can
replace concentrated seawater for protection. The film surface is
not contaminated, which extends the life of the film.
* The temperature, flow, water quality, output and other related
parameters of the system can be displayed, stored, counted,
tabulated and printed. The dynamic process flow screen in the
monitoring operation is clear and intuitive, and the system control
simplifies manual operations to ensure that the system can run
automatically, safely and reliably.
Seawater Desalination Equipment Capacity
Model | Capacity | Recovery Rate | Desalination | Output power | Membrane Brand | RO Rack Size (mm) |
KYRO-250 | 250L/H | 50% | 97% | 1.5kw | USA-DOW | 1550*620*1670 |
KYRO-500 | 500L/H | 50% | 97% | 1.5kw | USA-DOW | 1650*630*1800 |
KYRO-750 | 750L/H | 50% | 97% | 2.5kw | USA-DOW | 1870*630*1850 |
KYRO-1000 | 1000L/H | 50% | 97% | 2.5kw | USA-DOW | 1870*650*1850 |
KYRO-1500 | 1500L/H | 50% | 97% | 3.0kw | USA-DOW | 2440*750*2000 |
KYRO-2000 | 2000L/H | 50% | 97% | 3.5kw | USA-DOW | 2440*650*1750 |
KYRO-3000 | 3000L/H | 50% | 97% | 4.0kw | USA-DOW | 2440*620*1850 |
KYRO-4000 | 4000L/H | 50% | 97% | 5.0kw | USA-DOW | 2000*900*1800 |
KYRO-5000 | 5000L/H | 50% | 97% | 7.5kw | USA-DOW | 2000*900*1800 |
KYRO-6000 | 6000L/H | 60% | 97% | 9.5kw | USA-DOW | 3000*900*1800 |
KYRO-8000 | 8000L/H | 60% | 97% | 13.5kw | USA-DOW | 3000*900*1800 |
KYRO-9000 | 9000L/H | 60% | 97% | 14.0kw | USA-DOW | 3000*900*1800 |
Seawater Desalination Equipment Component:
There are several kinds of consumables you need to replace
regularly. (for 500LPH)
a. Quartz sand: replaced about every 15 months. 50kg/bag,100kg/set
b. Activated carbon: replaced about every 15 months. 25kg/bag,
25kg/set
c. Resin: replaced about every 15 months. 25L/bag, 50L/set
Seawater Desalination Equipment Processing
Process: raw water tank + raw water pump + quartz sand filter +
activated carbon filter + water softener/chemical dosing
system(optional) + security filter + high pressure pump + ro system
+ pure water tank + UV sterilizer(ozone generator) + precision
filter + water supply point
Some parts function:
1. Raw water pump: provide needed pressure for every
pre-treatment filter;
2. Quartz sand filter: use fiber glass as housing, fill quartz
sand, it can filter big particles impurities, suspended substances,
colloids etc. Important to remove iron and sediments you
mentioned;^^
3. Activated carbon filter: use fiber glass as housing, fill
activated carbon, remove color, odor, residual chlorine and
organics substances;
4. Security filter: prevent large particles, bacteria, viruses
into RO membrane, accuracy is 5µm;
5. High pressure pump: provide needed working pressure for RO
system, ensure production capacity of pure water;
6. RO system: can remove particles, colloids, organic
impurities, heavy metal ions, bacteria, virus, heat source etc.
harmful substances and 99% dissolved salts.
7. Ozone generator(for bottled drinking): can continue to kill
bacteria even water fill into bottled,viruses,cell damage,atc...
Seawater Desalination Equipment Details
