|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Mayne
Wisdomlong Technology CO.，LTD |
|
Verified Suppliers
|
|
|
GE Drive Control Board DS200SDCCG2A primary controller for
the drive with 3 microprocessors and RAM
DS200SDCCG2A Technical Specifications
Manufacturer GE General Electric
Series Mark V
Part Number DS200SDCCG2A
Product Type SDCC Drive Control Card
Instruction Manual GEI-100029
Product Description
The GE Drive Control Board DS200SDCCG2A is the primary controller
for the drive. The GE Drive Control Board DS200SDCCG2A is populated
with 3 microprocessors and RAM that can be accessed by multiple
microprocessors at the same time. The GE Drive Control Board
DS200SDCCG2A is populated with 5 connectors for erasable
programmable read-only memory (EPROM). The connectors come from the
factory without EPROMs installed. Four of the EPROMs are used to
store configuration data from the factory and one EPROM is used to
contain user configuration data.
During the replacement procedure, you must wear a wrist strap to protect the EPROMs from static electricity. Remove all five of the EPROMs from the defective board and store them in a safe place. Then, install the EPROMs in the same connectors on the replacement board. In this way, the board will have the same configuration values as the original board.
At the same time when you remove the EPROM chips also remove any auxiliary cards installed on the original board. The auxiliary cards are mounted on the board and they also have cables connected from the optional card. Then, install them on the replacement board along with the EPROMs. Be sure to connect any cables that are required for the optional cards.
Sometimes the replacement board is a newer version of the original board and the replacement board might appear to have different looking components. Also the components might be in different locations and in some cases the components might be missing from the replacement board.
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| ABB Module | AB Module 1756-,1759- Tourch Screen 2711- |
| Mitsubishi Drive MR- , Motor HA -,HC | Emerson MoudlesVE- ,KJ - |
| Fanuc motor A0-, Drive | Yokogawa transmitter EJA- |
| Rosemount Transmitter 3051- | Schneider Module 140- |
| Panasonic Motor , Drive MH- | Siemens Module 6ES-, Touch Screen 6AV- |
Similar prodcut for GE Fanuc IC693CMM321
| Part Number | Description |
All Parts Commonly | Call Parts Super Center 800-727-8443 |
| 106B7033P1 | Operating Arm, IC9445 Lever Limit Switch |
| 106B7085G5 | Cam Follower, IC9446 Rotating Limit Switch |
| 117A7920P1 | Roller, IC9445 Lever Limit Switch |
| 129B5749P1 | Star Wheel, IC9445 Lever Limit Switch |
| 144A4871P2 | Shaft, IC9445 Lever Limit Switch |
| 1970369P7 | Weight for Operating Arm, IC9445 Lever Limit Switch |
| 721B773G1 | Contact Unit, IC9445 Lever Limit Switch |
| 721B773G3 | Contact Unit, IC9445 Lever Limit Switch |
| Limit Switch, Lever, General-purpose, Standard Contact, 1 Circuit, IC9445 Lever Limit Switch | |
| IC9445A200AB | Limit Switch, Lever, General-purpose, Standard Contact, 2 Circuits, IC9445 Lever Limit Switch |
| IC9445A200AC | Limit Switch, Lever, General-purpose, Maintained Contact, 2 Circuits, IC9445 Lever Limit Switch |
| IC9445A204AM | Limit Switch, Lever, General-purpose, Snap Action Contact, 2 Circuits, IC9445 Lever Limit Switch |
| IC9445B200AA | Limit Switch, Lever, Watertight, Standard Contact, 1 Circuit, IC9445 Lever Switch |
| Limit Switch, Lever, Watertight, Standard Contact, 2 Circuits, IC9445 Lever Limit Switch | |
| IC9445B200AC | Limit Switch, Lever, Watertight, Maintained Contact, 2 Circuits, IC9445 Lever Limit Switch |
| IC9445B206AM | Limit Switch, Lever, Watertight, Snap Action Contact, 2 Circuits, IC9445 Lever Limit Switch |
| IC9445B206AN | Limit Switch, Lever, Watertight, Snap Action Contact, 1 Circuit, IC9445 Lever Limit Switch |
| IC9445C200 | Limit Switch, Lever, Weight, Cable, General-purpose, IC9445 Lever Limit Switch |
| IC9445C208 | Limit Switch, Lever, Less Weight, Cable, General-purpose, IC9445 Lever Limit Switch |
| IC9445D200 | Limit Switch, Lever, Weight, Cable, Watertight, IC9445 Lever Limit Switch |
| IC9445D204 | Limit Switch, Lever, Less Weight, Cable, Watertight, IC9445 Lever Limit Switch |
| IC9445H200AA | Limit Switch, Lever, Watertight Bronze, Standard Contact, 1 Circuit, IC9445 Lever Limit Switch |
| IC9445H200AB | Limit Switch, Lever, Watertight Bronze, Standard Contact, 2 Circuits, IC9445 Lever Limit Switch |
| IC9445Y100 | Lever, Straight, Molded Phenolic, 4 Inch, IC9445 Lever Limit Switch |
| IC9445Y101 | Lever, Straight, Hardened Steel, 4 Inch, IC9445 Lever Limit Switch |
| IC9445Y102 | Lever, Forked Roller, Harden Steel, IC9445 Lever Limit Switch |
| IC9445Y103 | Lever, Straight, Hardened Steel, 4 Inch, IC9445 Lever Limit Switch |
| IC9445Y106 | Lever, Crane Hoist Hook, 6 Feet Cable, IC9445 Lever Limit Switch |
| IC9445Y108 | Lever Straight, IC9445 Lever Limit Switch |
| IC9445Y110 | Lever, Fork, IC9445 Lever Limit Switch |
| IC9445Y111 | Lever, Straight, Molded Phenolic, 7 Inch, IC9445 Lever Limit Switch |
| IC9445Y112 | Lever, Straight, Molded Phenolic, 6 Inch, IC9445 Lever Limit Switch |
| IC9445Y113 | Lever, Offset, Molded Phenolic, 6 Inch, IC9445 Lever Limit Switch |
| IC9445Y114 | Lever, Straight, Hardened Steel, 6 Inch, IC9445 Lever Limit Switch |
| IC9445Y115 | Lever, Straight, Hardened Steel, 6 Inch, IC9445 Lever Limit Switch |
| IC9445Y116 | Lever, Straight, Composition Rubber, 6 Inch, IC9445 Lever Limit Switch |
| IC9445Y138 | Lever, Hardened Steel, 7 Inch, IC9445 Lever Limit Switch |
Q1. What about the lead time?
A: 3-5 days for Sample preparing ,8-10 working days for mass
production.
Q2. Do you have any MOQ limit of Industrial Servo Drives?
A: Low MOQ, 1pc is available.
Q3. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive.
Airline and sea shipping also optional.
Secondly, during the guarantee period, we will send new lights with
new order for small quantity. For defective batch products, we will
repair them and resend them to you or we can discuss the solution
including re-call according to real situation.
