GE Generator Regulator Board DS3800DXRA features 1 20-pin connector with 10 jumpers

GE Generator Regulator Board DS3800DXRA features 1 20-pin connector with  10 jumpers

Product Description
The GE Generator Regulator Board DS3800DXRA features 1 20-pin connector and 10 jumpers. The GE Generator Regulator Board DS3800DXRA also is populated with multiple capacitors and 5 indicator LEDs. The board is also populated with a toggle switch for resetting the board.

The LEDs indicate activity is taking place in different circuits on the board. They provide a quick and easy way for the drive operator to monitor the condition of the board. If the LEDs are flashing or staying lit for a short period of time, the operator will know that the board is in a good condition. If the LEDs fail to light, it provides an indication that the board is experiencing a problem If that is the case, several means of troubleshooting and resolving issues are available.

If the LEDs have stopped flashing and you suspect a problem, a qualified operator can switch the reset toggle switch to restart the board. The reset button doesn’t remove current from the board. Instead, it forces the board to restart processing. Often, if signals to the board are interfered with by high-voltage electricity, the restart process enables the signals to restart and any problems are resolved. However, only a qualified operator or servicer should use the restart switch. This is because using the switch requires the individual to reach into the drive while high-voltage current is present in the board. This exposes the servicer or operator to hazardous conditions that can lead to electric shock or burn.

OTHER SUPERIOR PRODUCTS

 
Similar prodcut for GE

DS3800DDCD181A
DS3800DDCD18IA
DS3800DDCD18LA
DS3800DDCD1BIA
DS3800DDCD1BLA
DS3800DDCDI81A
DS3800DDCDI8IA
DS3800DDCDI8LA
DS3800DDCDIB1A
DS3800DDCDIBIA
DS3800DDCDIBLA
DS3800DDCDL81A
DS3800DDCDL8IA
DS3800DDCDL8LA
DS3800DDCDLB1A
DS3800DDCDLBIA
DS3800DDCDLBLA
DS380ODDCD181A
DS380ODDCD18IA
DS380ODDCD18LA
DS380ODDCD1B1A
DS380ODDCD1BIA
DS380ODDCD1BLA
DS380ODDCDIB1A
DS380ODDCDIBIA
DS380ODDCDIBLA
DS3800DDCD1B1A-A
DS3800DDCD1B1A-B
DS3800DDCD1B1A-C
DS3800DDCD1B1A-D
DS3800DDCD1B1A-E
DS3800DDCD1B1A-F
DS3800DDCD1B1A-G
DS3800DDCD1B1A-H
DS3800DDCD1B1A-I
DS3800DDCD1B1A-J
DS3800DDCD1B1A-K
DS3800DDCD1B1A-L
DS3800DDCD1B1A-M
DS3800DDCD1B1A-N
DS3800DDCD1B1A-O
DS3800DDCD1B1A-P
DS3800DDCD1B1A-Q
DS3800DDCD1B1A-R
DS3800DDCD1B1A-S
DS3800DDCD1B1A-T
DS3800DDCD1B1A-U
DS3800DDCD1B1A-V
DS3800DDCD1B1A-W
DS3800DDCD1B1A-X
DS3800DDCD1B1A-Y
DS3800DDCD1B1A-Z

Product Description

The DS3800DBIB is a small printed circuit board (PCB) designed as part of the Speedtronic (Mark IV) line manufactured by GE. The Speedtronic system is designed to sequence turbine fuel and to sequence turbine systems and their auxiliaries for startup. The Mark IV system is designed with a distributed control system which runs on an array of interconnected microprocessors. When one section of this gridwork fails, turbines will continue to work under the control of other parts of the system. In this way downtime is limited. The DS3800DBIB is designed specifically as an interface board.

The DS3800DBIB is a small daughterboard that works as a plug-in to another, larger PCB. It has been drilled out at the factory, one hole in each corner of the board. This board also has four connectors numbered 1 through 4. It has two small screw mounts covered by black tabs. The first mount is marked C101 and is positioned next to a ring marked TP1. The second is not marked and positioned next to a ring marked TP2. The DS3800DBIB has one capacitor rated 708A1, M/E 200V 1.0 +10%. It also has one blue potentiometer located on the edge of the board that is wired for variable resistance. There are ten resistors and six small capacitors marked 'cr' on the DS3800DBIB PCB

 
Q1. What about the lead time?
A: 3-5 days for Sample preparing ,8-10 working days for mass production.
 
Q2. Do you have any MOQ limit of Industrial Servo Drives?
A: Low MOQ, 1pc is available.
 
Q3. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive. Airline and sea shipping also optional.
 
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.