|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Mayne
Wisdomlong Technology CO.，LTD |
|
Verified Suppliers
|
|
|
GE IC660BBD021 24/48 VDC Sink I/O 16 Circuit series 90-30 PLCs
3-wire solid sensors
Product information GE IC697MDL653 :
The IC660BBD021 has many configurable parameters, including output pulse test, configurable input filter time, output power up defaults, and output hold last state or default. The block is equipped with electronic short circuit and over temperature protection. It can detect a failed switch, open wire in tristate inputs, overload, or no load. Also, protective mechanisms prevent any damage due to overload by shutting down the system.
The block should be installed in a protective case in a place with
no airborne contaminants and with adequate cooling and air flow.
IC660BBD021 needs a grounding system. The 16 circuits of the block
use terminals 6 to 21. Those terminals can work as inputs or
outputs. Outputs connect to DC- and inputs to DC+ with no need of
logic inversion. Using a terminal as a tristate input requires one
resistor mounted at the dry contacts of the input device. This
ensures open wire diagnostic availability.
When a user decides to disconnect block power, circuit power must be disconnected as well. If power is applied to field terminals, touching the pins is very dangerous and can cause electrical shock. To replace an electronics assembly, a handheld monitor should first be connected. The user must monitor the circuits from the HMM menu and then turn it off and disconnect. The user can now power down the block, remove the electronics assembly, and install the new one. Terminals can be used as inputs or outputs using the + or – side of the terminal board.
| Rated Voltage: | 24/48 VDC |
| # of Points: | 16 |
| Input Range: | 18-56 VDC |
| Load Current: | 2 Amp |
| Operating Voltage: | 18-56 VDC |
| Points per Common: | One group of 16 |
Another module:
| IC694MDL230 | 120 VAC Isolated Input (8 Points) |
| IC694MDL231 | 240 VAC Isolated Input (8 Points) |
| IC694MDL240 | 120 VAC Input (16 Points) |
| IC694MDL241 | 24 VAC/VDC Input (16 Points) |
| IC694MDL250 | 120 VAC Isolated Input (16 Points) |
| IC694MDL260 | 120 VAC Input (32 Points)** |
| IC694MDL632 | 125 VDC Input (8 Points) |
| IC694MDL634 | 24 VDC Input, Neg/Pos Logic (8 Points) |
| IC694MDL645 | 24 VDC Input, Neg/Pos Logic (16 Points) |
| IC694MDL646 | 24 VDC Input, Neg/Pos Logic, 1 msec Filter (16 Points) |
| IC694MDL654 | 5/12 VDC (TTL) Input, Neg/Pos Logic, (32 Points) |
| IC694MDL655 | 24 VDC Input, Neg/Pos Logic, 1 ms, (32 Points) |
| IC694MDL660 | 24 VDC Input (32 Points)** |
| IC694ACC300 | Input Simulator Module (8 Points) |
HC-UFS13 | HC-UFS23 | HC-UFS73 | HC-UFS43 |
HC-UFS72 | HC-UFS152 | HC-UFS202 | HC-UFS352 |
HC-UFS502 | HC-SFS81 | HF-KP13 | HF-SP102B |
HC-SFS121 | HC-RFS153 | HF-MP13B | HF-SP152B |
HC-SFS201 | HC-RFS203 | HF-MP23B | HF-SP202B |
HC-SFS301 | HC-RFS353 | HF-MP43B | HF-SP352B |
HC-SFS52 | HC-RFS503 | HF-MP73B | HF-SP502B |
HC-SFS102 | HA-LFS11K2 | HF-KP13B | HF-SP51 |
HC-SFS152 | HA-LFS15K2 | HF-KP23B | HF-SP702B |
HC-SFS202 | HA-LFS22K2 | HF-KP43B | HF-SP81 |
HC-SFS352 | HA-LFS11K2B | HF-KP73B | HF-SP121 |
HC-SFS502 | HA-LFS15K2B | HF-SP52 | HF-SP201 |
HC-SFS702 | HA-LFS22K2B | HF-SP102 | HF-SP51B |
HC-SFS53 | HF-MP053 | HF-SP152 | HF-SP81B |
HC-SFS103 | HF-MP13 | HF-SP202 | HF-SP121B |
HC-SFS153 | HF-MP23 | HF-SP352 | HF-SP201B |
HC-SFS203 | HF-MP43 | HF-SP502 | HC-SFS202K |
HC-SFS353 | HF-MP73 | HF-SP702 | HC-SFS201B |
HC-RFS103 | HF-KP053 | HF-SP52B | HC-SFS202B |
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
