|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Mayne
Wisdomlong Technology CO.，LTD |
|
Verified Suppliers
|
|
|
GE IC697CPU732 CPU MODULE 12MHZ 2K DISCRETE I/O EXPANDABLE MEM FLT PT
Product information GE IC697CPU732:
The IC697CPU732 supports IC697 LAN interface modules, IC697
discrete and analog I/O modules, multiple coprocessor and
communications modules, I/O Link Interface modules, and bus
controllers for IC66* modules. Configuration of this device is
accomplished by connecting the module to a programmer computer and
running IC641 programming software.
DIP switches and jumpers are not used in the configuration of this
product. For security, configuration settings are password
protected. User memory, programming data, the calendar, and the
clock are maintained by a lithium CMOS battery.
This device supports an 8-wire serial multidrop configuration. The
number of programmable controllers allowed in this configuration is
determined by cable length. A 24 AWG 30V serial cable should be
used in this setup to connect the controller to a computer.
Warning: Terminal strips or alternate connectors should not be used
in the transmission line for a multidrop configuration.
To operate the IC697CPU732, use either the three-position switch or
an attached computer running IC641 programming software.Refer to
the product manual for proper installation instructions. Turn off
power before connecting the device. Place the three-position
operation switch in the STOP position. Place the battery in one of
the battery connection slots. Connect the device to slot 1. Power
on the device.
More information:
Configuration The IC697 CPU and I/O system is configured with IC641
programming software. There are no DIP switches or jumpers used to
configure the system.
The CPU verifies the actual module and rack configuration at
power-up and periodically during operation. The actual
configuration must be the same as the programmed configuration.
Deviations are reported to the CPU alarm processor function for
configured fault response
IC697CPU732 's Features:
Supports floating point calculations.
Single slot CPU.
512 inputs and outputs (any mix).
Up to 8K analog I/O. 0.4 microseconds per boolean function.
12 MHz, 80C186 microprocessor.
Supports IC66* and IC697 I/O.
Programmed by IC641 software products.
Configurable data and program memory.
Battery-backed calendar clock.
Three position operation mode switch.
Password controlled access.
Three status LEDs.
IC697CPU732 's details: 
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
