Wisdomlong Technology CO.,LTD |
Verified Suppliers
|
|
GE IC693MDL752 OUTPUT MODULE 32 POINT NEGATIVE LOGIC 5/12/24 VDC
Product information GE IC693MDL752 :
The IC693MDL752 is a dual-mode discrete output module from the
Series 90-30 Programmable Logic Controller (PLC) product family.
This product family is formerly manufactured by GE Fanuc however,
recently acquired by Emerson Automation. This module supports 12/24
VDC mode and 5VDC TTL mode, negative logic output module. It
features Thirty-Two (32) point outputs in groups of Four (4) with
each group having Eight (8) output channels each.
Depending on the operating mode of the module, the output current
per point varies. Specifically, with 12/24 VDC mode, the output
current rating of the module is 0.5 Amperes per point, 4 Amperes
per group, and 3 Amperes maximum per common pin while when
configured to operate at TTL mode, each output channel has an
output current rating of 0.25 mA. Similarly, the output voltage
varies depending on the selected mode. At 12/24 VDC mode, the
output voltage range is 10.2 - 28.8 VDC with a nominal output of 24
VDC. For TTL mode, the output voltage range is 4.75 VDC - 5.25 VDC
with a nominal output voltage of 5 VDC.
Each output groups are independently configurable to operate in
12/24 VDC or TTL mode providing operational flexibility. This
module has rated isolation of 1500 volts between the field side and
logic side and 250 Volts between groups. Two (2) methods are
recommended when wiring output devices to this module particularly,
the direct method with the use of IC693CBL327 and IC693CBL328
pre-wired cables where one end is a pre-assembled connector while
the other end of the cable is flying leads. Another supported
method is the TBQC method utilizing a terminal block quick connect.
The IC693MDL752 is a 5 to 24 Volts DC rated TTL negative logic
output module for the Series 90-30 PLCs from GE Fanuc. The
IC693MDL752 negative logic output module provides 32 discrete
outputs arranged in 4 groups which are isolated from each other.
Each group of 4 outputs has its own common. The outputs on the
module are sinking type outputs or negative logic outputs for which
the ON state corresponds to an active low output state. The
IC693MDL752 negative logic output module has 2 operating modes. In
the TTL mode, the module outputs can switch loads across 5 Volts DC
voltage and they can sink a peak current of 25 milliamps per point.
In the 12/24 Volts DC mode, the module outputs can switch loads
over 12 to 24 Volts DC and they can sink a peak current of 0.5 Amps
per point.
Each group of outputs on the IC693MDL752 negative logic output
module can be used in the operating mode that is required for any
particular application. When using different groups in different
operating modes, the effects of electrical noise should be
considered. One integrated pull-up resistor is provided for each
output point. Backplane isolation between the logic side and field
side is provided through opto-couplers. The LED indicators on the
IC693MDL752 negative logic output module provide status updates for
the output points. The IC693MDL752 negative logic output module
uses 32 bits of discrete output data.
Connections from the IC693MDL752 negative logic output module to
output circuits are made through 2 male 24-pin connectors which are
mounted on the front side of the I/O module. The maximum current
output ratings in the TTL mode and in the 12/24 Volts mode are 25
milliamps and 0.5 Amps per point, respectively.
Rated Voltage | 5, and 12 through 24 volts DC, negative logic (active low) 4.75 to 5.25 volts DC (TTL mode) 10.2 to 28.8 volts DC (12/24V mode) 32 (four groups of eight outputs each) 1500 volts between field side and logic side 250 volts between groups 25 mA per point (maximum in TTL mode) 0.5 amps per point (maximum in 12/24V mode); with 4 amps maximum per group and 3 amps maximum per group common pin
4.6 amps for 10 ms 0.4 volts DC (maximum in TTL mode) 0.24 volts DC (maximum in 12/24V mode) 0.1 mA maximum 0.5 ms maximum 0.5 ms maximum 260 mA (maximum) from 5 volt bus on backplane; (13 mA + 3 mA/point ON + 4.7 mA/LED) 12 mA (maximum) per group from user supply @ 5VDC and all eight outputs in group ON 25 mA (maximum) per group from user supply @ 12 VDC and all eight outputs in group ON 44 mA (maximum) per group from user supply @ 24 VDC and all eight outputs in group ON |
Output Voltage Range | |
Outputs per Module | |
Isolation | |
Output Current | |
Output Characteristics | |
Inrush Current | |
On-state (active low) | |
Voltage Drop | |
Off-state Leakage Current | |
On Response Time | |
Off Response Time | |
Internal Power Consumption |
IC693MDL752 's details:
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.