|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Mayne
Wisdomlong Technology CO.，LTD |
|
Verified Suppliers
|
|
|
GE IC660ELB921 Single-Channel Genius I/O PCIM 5 Volts DC 400
milliamps
Product information GE IC660ELB921 :
The IC660ELB921 is a PC Interface Module (PCIM) that is mainly
utilized to enable connection to Genius I/O devices residing over
Genius I/O Bus, allowing data exchange and controller-like
functions implemented by the host controller. This PCIM module is
formerly produced by GE Fanuc, currently under Emerson Automation.
The IC660ELB921 is a single slot PC interface module supporting the
installation of a single daughterboard with catalog number
IC660ELB912. This interface module is mounted to the host
computer’s ISA Slot and requires 4 bytes of memory from the host
device and additional 16 Kbytes for the installed daughtercard. It
draws current from the backplane amounting to 400 mA, maximum at 5
VDC, +/- 10%. It has bus loading of 1 LS TTL load per input and Bus
drive capability of 10 LS TTL loads per output. This PCIM card is a
single slot “AT” styleboard. It provides a connection to an
external Hand-Held Monitor (HHM) as well as a Serial bus connection
through board edge terminals or external connectors.
The IC660ELB921 comes with a status LED indicators such as
Daughterboard OK and Communication OK. The operating temperature of
the IC660ELB921 is 0–60 C(32–140 F) while the Storage temperature
is –40 to +70 C(–40 to 158 F) and relative humidity of 5-95%
(non-condensing). It has an operating altitude of 40,00 feet,
operating vibration of 0.2-inch displacement, and operating shock
of hock 5 G, 10 ms duration. The IC660ELB921 is configured using
the PCIM configuration software where the software library
providing the high-level interface can be accessed. This software
library is supplied in a version compatible with the MSDOS
operating system such as C/MSDOS and BASIC/MSDOS.
The IC660ELB921 PC Interface Module is a single-channel PCIM board
manufactured by GE Fanuc as part of the Genius I-O series. It can
be interfaced to only 1 Genius bus at a time. This module is made
for use with the IBM PC, XT, and AT type personal computers. This
AT type interface board is also compatible with the different
Genius communication protocols as well as with communications
timing. The IC660ELB921 PC Interface Module is available with a
single daughterboard and with a motherboard. The configuration
software which is provided with this module can be used to
configure the daughterboard independently of the motherboard. The
daughterboard can be connected with a Genius bus device
individually and it acts as a general-purpose I/O controller for
the I/O system.
The IC660ELB921 single-slot PCIM board has an efficient motherboard
that connects the daughterboard with IBM-compatible host computers.
It is made to buffer all the signals which are needed for
communication with the host bus of the system.
Some of the daughterboard controls and monitoring facilities
provided by the motherboard include ISA-compatible backplanes,
detection of low supply voltage levels, address decoding through
memory maps, and signal sequencing. Each daughterboard has 2 LEDs
for indicating the status of the board and the communication
process. The memory requirement of the motherboard is 4 bytes and
the requirement for the daughterboard is 16 KB.
The IC660ELB921 PC Interface Module is supplied with the
configuration software and the PCIM software library that provide a
high-level interface between the user-developed software and the
PCIM. It uses 5 Volts DC of logic power and it should not vary by
more than 10% below or above the nominal level in order for the
module to function correctly. During installation, make sure to
leave at least 1/8 inch space between this module and other modules
to allow proper cooling.
More information:
| LED Indicators | GENI OK; COMMS OK |
| Bus Loading | 1 LS TTL load per input line |
| Installation | ISA Slot |
| Bus Drive Capability | 10 LS TTL load per output line |
| Power Requirements | 5 volts DC +/– 10%, 400 ma (max) |
| Status LEDs | 2 (for each daughterboard) |
| Operating temperature | 0–60 C(32–140 F) |
| Ambient Operating Temperature | 0 to 60 degrees Celsius |
| Storage temperature | –40 to +70 C(–40 to 158 F) |
| Weight | 3 Pounds |
| Humidity | 5-95% (non-condensing) |
| Operating altitude | 40,00 feet |
| Product Lifecycle | Discontinued |
IIC660ELB921 's details:
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
