DLC3010 Fihser HART 249W Digital Level Controller 12~30V DC digital level controller

DLC3010 Fihser HART 249W Digital Level Controller 12~30V DC digital level controller

OTHER SUPERIOR PRODUCTS

Main technical parameter

Power supply: 12~30V DC; the controller has reverse polarity protection.(when HART is

communicating, the voltage of controller ≥17.75V DC)

Output signal: 4~20 mA DC (Positive direction – the increase of level, interface, or density make output

increase; Negative direction – the increase of level, interface, or density make output decrease.)

Measuring range: 300mm—2500mm (can also over range)

Nominal pressure: ≤42.0Mpa

Nominal diameter: DN40 or as customers’ request

Ambient temperature: –40ºC to +80ºC (when ≤–30ºC, no LCD display)

Operating temperature: –70ºC to +400ºC

Measuring accuracy: 0.5%

Influence from power supply: When the voltage of the power supply varies between min. and max. ,the output change is within <±0.2%. of the full scale.

LCD display: Output current signal,process variable,process temperature,percentage range,rotation angle of torque tube.

Medium density difference: ≥0.08g/cm³

Material of torque tube: Standard configuration Inconel 600,or Monel, HasetlloyC-276

Wetted material: 304,316L or as customers’ request

Flange standard: HG/T20592-2009,HG/T20615-2009 or as customers’ request

Power entry: Two NPT 1/2 (female thread) or as customers’ request

Explosion-proof: Explosion isolation ExdⅡCT6, Intrinsically safe ExiaⅡCT6

Protection grade: IP66

Alarm jumper: For the self-diagnosis to the inaccuracy failure of the process variables (for example, the electronic module failure). Configure the process variables of high and low alarms.

Using the Field Communicator, you can perform several operations with the DLC3010 digital level controller. You can interrogate, configure, calibrate, or test the digital level controller. Using the HART protocol, information from the field can be integrated into control systems or be received on a single loop basis.

DLC3010 digital level controllers are designed to directly replace standard pneumatic and electro-pneumatic level transmitters. DLC3010 digital
level controllers mount on a wide variety of caged and cagelss 249 level sensors. They mount on other manufacturers’ displacer type level sensors through the use of mounting adaptors.

249 Caged Sensors (see table 1-6)
249, 249B, 249BF, 249C, 249K, and 249L sensors side-mount on the vessel with the displacer
mounted inside a cage outside the vessel. (The 249BF caged sensor is available only in Europe, Middle East, and Africa.)
249 Cageless Sensors (see table 1-7)
249BP, 249CP, and 249P sensors top-mount on the vessel with the displacer hanging down into the vessel.
249VS sensor side-mounts on the vessel with the displacer hanging out into the vessel.
249W wafer-style sensor mounts on top of a vessel or on a customer-supplied cage.

 

 

 

Rosemount

3051CD0A02A1AB1H2L4M5

New

Rosemount

3051CD1A02A1AB1H2L4M5

New

Rosemount

3051CD2A02A1AB1H2L4M5

New

Rosemount

3051CD3A02A1AB1H2L4M5

New

Rosemount

3051CD4A02A1AB1H2L4M5

New

Rosemount

3051CD5A02A1AB1H2L4M5

New

Rosemount

3051TG1A2B21A

New

Rosemount

3051TG3A2B21AB4

New

Rosemount

3051TG1A2B21AB4M5K5

New

Rosemount

3051TG5A2B21AB4M5E5

New

Rosemount

3051TG5A2C21AB4M5K5

New

Rosemount

3051TA1A2B21AB4M5K5

New

Rosemount

3051TA3A2B21AB4M5E5

New

Rosemount

3051TA3A2B21AB4M5I5

New

 

Rosemount

3051GP1A2B21AB4M5

New

Rosemount

3051GP3A2B21AB4M5K5

New

Rosemount

3051GP4A2B21AB4M5E5

New

Rosemount

3051GP5A2B21AB4M5I5

New

Rosemount

3051CG1A02A1AB1H2L4M5

Rosemount

3051CG1A02A1AB3H2L4M5

Rosemount

3051CG4A02A1AB1H2L4M5K5

New

Rosemount

3051CG4A02A1AB1H2L4M5I5

New

Rosemount

3051CG5A02A1AB3H2L4M5I5

New

Rosemount

3051CA1A02A1AB1H2L4M5

New

Rosemount

3051CA2A02A1AB1H2L4M5K5

New

Rosemount

3051CA4A02A1AB1H2L4M5E5

New

Rosemount

3051CA5A02A1AB1H2L4M5I5

New

Rosemount

3051CA3A02A1AB3H2L4M5K5

New

Rosemount

3051CA5A02A1AB3H2L4M5K5

New

Rosemount

3051CA1A02A1AB3H2L4M5E5

New

 

 

 

 

 

FAQ

 

Q1. What about the lead time?

A: 3-5 days for Sample preparing ,8-10 working days for mass production.

 

Q2. Do you have any MOQ limit of Industrial Servo Drives?

A: Low MOQ, 1pc is available.

 

Q3. How do you ship the goods and how long does it take to arrive?

A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive. Airline and sea shipping also optional.

 

Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.