|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Mayne
Wisdomlong Technology CO.，LTD |
|
Verified Suppliers
|
|
|
AB 1606-XLS960E-3 Power Supply Switched Mode 960W Output 24-28
Output Voltage 3P
About 1606-XLS960E-3 :
The 1606-XLE supplies are cost optimized power supplies without
compromising quality, reliability and performance. The 1606-XLE120E
is part of the XLE power supply family, existing alongside the high
featured XLS family.
The 1606-XLE includes all the essential basic functions and the
devices have a power reserve of 20%. This extra current may even be
used continuously at temperatures up to +45°C. The most important
features are the small size, the high efficiency and the wide
temperature range. The Auto-select input makes worldwide
installation and usage very simple. Defects or system failures
caused by wrongly set switches can not occur.
Bulletin 1606-:
Quick mounting and connecting, innovative DIN-Rail mount, smallest
in class
UL Listed NEC Class 2; Class 1, Div. 2; Semi F47; ODVA Approved
Low inrush current limiting
PFC Active or Passive
Wide range input; auto select input
Superior overload design (continuous current, no hiccup)
NEC Class 2 'Limited Power' options
Selectable operating mode (single/parallel)
Superior efficiency and temperature rating
Instructions:
a) Use appropriate copper cables that are designed for an operating
temperature of: 60°C for ambient up to 45°C and 75°C for ambient up
to 60°C minimum.
b) Follow national installation codes and installation regulations!
c) Ensure that all strands of a stranded wire enter the terminal
connection!
d) Up to two stranded wires with the same cross section are
permitted in one connection point (except PE wire).
e) Do not use the unit without PE connection.
1606-XLE120E & 1606-XLE120EC 24V, 5A; Single Phase Input
Instructions for two phase operation:
a) A phase to phase connection is allowed as long as the supplying
voltage is below 240V(+10%).
b) Use a fuse or a circuit breaker to protect the N input. The N
input is internally not protected and is in this case connected to
a hot wire
Adisadvantages:
a. The faulty power supply can not be recognized. The green LED
will still be on since it is reverse-powered from the other power
supply.
b. It does not cover failures such as an internal short circuit in
the secondary side of the power supply. In such a - virtually
nearly impossible - case, the defective unit becomes a load for the
other power supplies and the output voltage can not be maintained
any more.
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
