|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Mayne
Wisdomlong Technology CO.，LTD |
|
Verified Suppliers
|
|
|
MR-J2S-500B 5Kw AC Servo Amplifier Mitsubishi 3 phase 200 to 230VAC 50/60Hz
Description of MR-J2S-500B
Mitsubishi general-purpose.
AC MR-J2S-500B servo amplifier.
MELSERVO-J2-Super Series.
servo MR-J2S-500B amplifier 100V/200V AC.
Rated output: 5kw.
SSCNET compatible.
Power supply: 200VAC.
compatible motors: HC-SFS502; HC-LFS302
| Manufacturer | Mitsubishi Electric |
| Product No | MR-J2S-500B |
| Product type | Servo amplifier |
| Power consumption (W) | 50 |
| Structure | Fan cooling, open (IP00) |
| Frequency | 3-phase 200 to 230VAC 50/60Hz |
Capacitor discharge time
The capacitor discharge time is as listed below. To ensure safety,
do not touch the charging section for
10 minutes after power-off
| Servo amplifier | Discharge time [min] |
| MR-J2S-10B(1) 20B(1) | 1 |
| MR-J2S-40B(1) 60B | 2 |
| MR-J2S-70B to 350B | 3 |
| MR-J2S-500B 700B | 4 |
| MR-J2S-11KB | 5 |
| MR-J2S-15KB | 6 |
| MR-J2S-22KB | 7 |
COMPLIANCE WITH EC DIRECTIVES
1. WHAT ARE EC DIRECTIVES?
The EC directives were issued to standardize the regulations of the
EU countries and ensure smooth
distribution of safety-guaranteed products. In the EU countries,
the machinery directive (effective in
January, 1995), EMC directive (effective in January, 1996) and low
voltage directive (effective in January,
1997) of the EC directives require that products to be sold should
meet their fundamental safety
requirements and carry the CE marks (CE marking). CE marking
applies to machines and equipment
into which servo amplifiers have been installed.
(1) EMC directive
The EMC directive applies not to the servo units alone but to
servo-incorporated machines and
equipment. This requires the EMC filters to be used with the
servo-incorporated machines and
equipment to comply with the EMC directive. For specific EMC
directive conforming methods, refer to
the EMC Installation Guidelines (IB(NA)67310).
(2) Low voltage directive
The low voltage directive applies also to servo units alone. Hence,
they are designed to comply with
the low voltage directive.
This servo is certified by TUV, third-party assessment
organization, to comply with the low voltage
directive.
(3) Machine directive
Not being machines, the servo amplifiers need not comply with this
directive.
Advantage Products:
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
Wisdomlong Technology CO.,LTD
