|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Mayne
Wisdomlong Technology CO.，LTD |
|
Verified Suppliers
|
|
|
GE FANUC SERIES 90-30 PLC Digital I/O Module IC697ACC621 FACTORY SEALED
The IC697ACC621 fan assemply is a rack fan assembly that has been introduced as an accessory into the Series 90-70 product line of PLCs by GE Fanuc Automation. This assembly is used to provide additional cooling to different racks within the series, especially to their connections and electronic parts. Overheating is one of the main causes of sudden stops during operation and of causing problems in systems that end up causing the damaged parts to need to be repaired or replaced. This rack fan assembly is meant to be attached to racks that are installed in places with little ventilation and that tend to become overheated. The GE Fanuc Automation IC697ACC621 rack fan assembly operates with a voltage of 120 Volts AC and an input power of 15 to 20 Watts for each fan at the same voltage.
| Brand | GE Fanuc |
| Series | Series 90-70 |
| Part Number | IC697ACC621 |
| Type | Rack fan assembly |
| Fan | Two |
| Voltage | 120 Volts AC |
| Frequency | 50-60 Hertz |
| Input power | 15-20 Watts per fan |
| Line Amps | 0.24-0.34 Amps per fan |
| Operating temperature | -28 to 70 degrees Celsius |
| Weight | 4 pounds |
| Filter | Polyurethane Foam, 30 PPI |
| Retainer | UL94V-0 Plastic |
| Compatibility | 5-slot series 90-70 racks and the 9-slots RX7i racks |
The IC697ACC621 fan assemply is a rack fan assembly that has been introduced as an accessory into the Series 90-70 product line of PLCs by GE Fanuc Automation. This assembly is used to provide additional cooling to different racks within the series, especially to their connections and electronic parts. Overheating is one of the main causes of sudden stops during operation and of causing problems in systems that end up causing the damaged parts to need to be repaired or replaced. This rack fan assembly is meant to be attached to racks that are installed in places with little ventilation and that tend to become overheated. The GE Fanuc Automation IC697ACC621 rack fan assembly operates with a voltage of 120 Volts AC and an input power of 15 to 20 Watts for each fan at the same voltage.
The GE Fanuc Automation IC697ACC621 rack fan assembly is compatible
with the 9-slot RX7i racks and with the 5-slot Series 90-70 racks.
This assembly has a locked rotor current range of 0.24 to 0.34 Amps
and it only weighs 4 pounds. This assembly includes 2 fans. The GE
Fanuc Automation IC697ACC621 rack fan assembly comes with a
polyurethane foam filter that is designed with 30 pores per square
inch and a plastic UL94V-0 retainer and guard. The fan assembly has
a low noise level when it operates and it uses ball bearings to
achieve an extended operating life. The operating temperature range
goes from 028 to 70 degrees Celsius. It is recommended to install
this equipment in a clean place so that the filter will not become
clogged.
Product Description:
GE Fanuc Discrete input module for 90 - 30 series PLC offers 16 input points with one common power input terminal. It requires an AC power source for convenient operation. Module has LED indicators at the top to offer ON/OFF status of each point. Module has circuit wiring information on the surface towards the inside and circuit identification information on the outside surface. Module has a voltage rating of 120 VAC at 50/60 Hz, 0 - 132 VAC at 50/60 Hz, input current rating of 12 milli-Amps and a power rating of 90 milli-Amps at 5 VDC. It has a maximum ON response time of 30 milli-seconds and maximum OFF response time of 45 milli-seconds. Module is compatible with input devices such as pushbuttons, limit switches and electronic proximity switches. Input/output module provides the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. It supports different voltage ranges, types, current capacity, isolation and response time to meet your application.
Product Details:
Input modules provide the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. Output modules provide the interface between the PLC and external output devices such as contactors, interposing relays, BCD displays and indicator lamps. This module requires an AC power source, it cannot be used with a DC power source.
Quick Details:
Related Product Recommendation:
| GE | VCIB-16A | GE | DS200CDBAG1ACA |
| GE | VMIVME-7671-421000 | GE | DS200DCFBG2BNC |
| GE | 269PLUS-100P-120 | GE | DS200FCRRG1AKD |
| GE | 369-HI-0-0-0-0 | GE | DS200LDCCH1ARA |
| GE | 369-HI-R-0-0-0 | GE | DS200LRPAG1AGF |
| GE | 531X111PSHAPG3 | GE | DS200PCCAG5ACB |
| GE | 531X113PSFARG1 | GE | DS200PCCAG9ACB |
| GE | 531X123PCHACG1 | GE | IC693DSM302 |
| GE | 531X139APMARM7 | GE | IC693MDL330 |
| GE | 531X303MCPBCG1 | GE | IC693MDL646 |
| GE | 531X305NTBACG1 | GE | IC693MDL655 |
| GE | 531X305NTBAPG1 | GE | IC693MDL730 |
| GE | IC200ALG322 | GE | IC693MDL752 |
| GE | IC200ALG620 | GE | IC693PBS105 |
| GE | IC200ALG630 | GE | IC693PCM301 |
| GE | IC200CHS002 | GE | IC200MDL742 |
| GE | IC200MDL740 | GE | IC200CPUE05 |
| GE | IC3600LTGA | GE | IC200PWR101 |
| GE | IC3600TUAA1 | GE | IC200PWR001 |
| GE | IC660BBD025 | GE | IC693PWR330 |
| GE | IC670MDL640 | GE | IC694APU300 |
| GE | IC670PBI001 | GE | IC694BEM331 |
| GE | IC693ACC310 | GE | IC694MDL645 |
| GE | IC693ALG223 | GE | IC694MDL655 |
| GE | IC693ALG390 | GE | IC694MDL740 |
The use of the product:
Our advantage Products:
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
(Modicon,SMC,SICK,NORGREN,Siemens etc.)
