Active Member
|
[China]
Address: E building, Meidu Square, Gongsu District, Hangzhou city, Zhejiang province, China
Contact name:Jay
Hangzhou sebos energy saving equipment co., ltd. |
|
|
Die casting machine servo energy saving equipment retrofitting Super power saving
15 years of professional reform experience create brilliant in market
1. Injection molding machine servo energy saving retrofitting
project
1) Servo control system supply pressure and flux according to the
machine’s demand
2) PLC outputs the corresponding signals
according to each action to control the output frequency of the
driver, so that the output flow of pump is precisely matched with
the requird
3) the external HMI is used to set up all the running
parameters, showing the system running status and abnormal alarm
information
4) Don't change the original control system and
hydraulic system
2. Advantage
1) Super energy saving: energy saving rate 35%-65%
2) Super stability: Widely speed rang and strong overload capacity
3) Excellent voltage range: 330V-600V
4) Both have motor KTY and PTC overheating protection function
5) Many additional green values: Extend the using life of injection molding machine parts, Low
noise, Reduce the use of cooling water
6) We supply the whole completed servo system:Including servo driver, servo motor, SUMITOMO gear pump, electric
cabinet, electric resistance, pressure sensor, magnet ring,
press-flow shields semaphore wire, power cable, oil flange, oil
suction pipe, semaphore converts board, U-steel and so on
7) Fast installation service: 100T-1500T machine takes 2 days to install servo energy saving
system; 1500-3000T takes 4 days to install servo energy saving
system
3. Specification
| SEBOS Servo Energy Saving System Specification | ||||||||||
| Servo system model | Servo motor | Pump | Servo driver | Die casting machine reference | ||||||
| Model | Flow L/Min | Model | KW | Model | Cc/r | Model | KW | Motor KW | Pressure MPA | Flow L/Min |
| DS-14168-STS | 168 | SM130Y-18 | 24.5 | QT62-80 | 80 | IS580T050-C | 30 | 22 | 14 | 135 |
| DS-14220-STS | 220 | SM180Y-18 | 33.9 | QT62-100 | 100 | IS580T070-C | 37 | 30 | 14 | 184 |
| DS-14275-STS | 278 | SM225Y-15 | 35.3 | QT62-125 | 125 | IS580T080-C | 45 | 37 | 14 | 226 |
| DS-14342-STS | 342 | SM280Y-18 | 52.7 | QT6252-100-63 | 163 | IS580T100-C | 55 | 55 | 14 | 320 |
| DS-14394-STS | 394 | SM360Y-18 | 67.8 | QT6252-125-63 | 188 | IS580T140-C | 75 | 60 | 14 | 400 |
4. Quality assurance
Production
Dectection
Assembling
System testing
Packaging
Put in storage
5. Promise
If the energy saving rate is not good,
don’t need to pay
If the servo system performance is not good,
don’t need to pay
If the installation service is not good, don’t
need to pay
The desire to save energy is delivered to us,
SEBOS is your loyal parter
