Shenzhen Sai Collie Technology Co., Ltd. |
Verified Suppliers
|
|
MSP430FR2476TPT Mixed-Signal Microcontroller IC 16-Bit 16MHz 64.5KB (64.5K x 8) FRAM Package 48-LQFP
Product Status | Active | |
Core Processor | MSP430 CPU16 | |
Core Size | ||
Speed | 16MHz | |
Connectivity | I²C, IrDA, SCI, SPI, UART/USART | |
Peripherals | Brown-out Detect/Reset, POR, PWM, WDT | |
Number of I/O | 43 | |
Program Memory Size | ||
Program Memory Type | FRAM | |
EEPROM Size | - | |
RAM Size | 8K x 8 | |
Voltage - Supply (Vcc/Vdd) | 1.8V ~ 3.6V | |
Data Converters | A/D 12x12b SAR | |
Oscillator Type | Internal | |
Operating Temperature | -40°C ~ 105°C (TA) | |
Mounting Type | Surface Mount | |
Package / Case | 48-LQFP | |
Supplier Device Package | 48-LQFP (7x7) |
Features
• Embedded microcontroller
– 16-bit RISC architecture
– Clock supports frequencies up to 16 MHz
– Wide supply voltage range from 3.6 V down to
1.8 V (minimum supply voltage is restricted by
SVS levels, see the SVS specifications)
• Optimized ultra-low-power modes
– Active mode: 135 µA/MHz (typical)
– Standby: LPM3.5, real-time clock (RTC)
counter with 32768-Hz crystal: 660 nA (typical)
– Shutdown (LPM4.5): 37 nA without SVS
• Low-power ferroelectric RAM (FRAM)
– Up to 64KB of nonvolatile memory
– Built-in error correction code (ECC)
– Configurable write protection
– Unified memory of program, constants, and
storage
– 1015 write cycle endurance
– Radiation resistant and nonmagnetic
• Intelligent digital peripherals
– Four 16-bit timers with three capture/compare
registers each (Timer_A3)
– One 16-bit timer with seven capture/compare
registers (Timer_B7)
– One 16-bit counter-only RTC
– 16-bit cyclic redundancy check (CRC)
• Enhanced serial communications with support for
pin remap feature
– Two eUSCI_A supports UART, IrDA, and SPI
– Two eUSCI_B supports SPI and I2C
• High-performance analog
– One 12-bit analog-to-digital converter (ADC)
with up to 12 channels
• Internal shared reference (1.5, 2.0, or 2.5 V)
• Sample-and-hold 200 ksps
– One enhanced comparator (eCOMP)
• Integrated 6-bit DAC as reference voltage
• Programmable hysteresis
• Configurable high-power and low-power
modes
• Clock system (CS)