Shenzhen Sai Collie Technology Co., Ltd. |
Verified Suppliers
|
|
CYW20730A2KML2GT RF Power Transistors Single-Chip Bluetooth Transceiver forWireless Input Devices Package 32-QFN
Type | TxRx + MCU | |
RF Family/Standard | Bluetooth | |
Protocol | Bluetooth v3.0 | |
Modulation | - | |
Frequency | 2.4GHz | |
Data Rate (Max) | 1Mbps | |
Power - Output | 4dBm | |
Sensitivity | -88dBm | |
Memory Size | - | |
Serial Interfaces | I²C, SPI, UART | |
GPIO | 14 | |
Voltage - Supply | 3.8V | |
Current - Receiving | 26.6mA | |
Current - Transmitting | 24mA | |
Operating Temperature | 0°C ~ 70°C | |
Mounting Type | Surface Mount | |
Package / Case | 32-VFQFN Exposed Pad | |
Supplier Device Package | 32-QFN (5x5) |
Applications:
■ Wireless pointing devices: mice, trackballs, gestural controls
■ Wireless keyboards
■ 3D glasses
■ Remote controls
■ Game controllers
■ Point-of-sale (POS) input devices
■ Remote sensors
■ Home automation
■ Personal health and fitness monitoring
Features:
■ On-chip support for common keyboard and mouse interfaces
eliminates external processor
■ Programmable keyscan matrix interface, up to 8 × 20 keyscanning
matrix
■ 3-axis quadrature signal decoder
■ Shutter control for 3D glasses
■ Infrared modulator
■ IR learning
■ Triac control
■ Triggered Broadcom Fast Connect
■ Supports Adaptive Frequency Hopping
■ Excellent receiver sensitivity
■ Bluetooth specification 3.0 compatible, including enhanced power
control (Unicast Connectionless Data)
■ Bluetooth HID profile version 1.0 compliant
■ Bluetooth Device ID profile version 1.3 compliant
■ Bluetooth AVRCP-CT profile version 1.3 compliant
■ 10-bit auxiliary ADC with 28 analog channels
■ On-chip support for serial peripheral interface (master and slave
modes)
■ Broadcom Serial Communications (BSC) interface (compatible with
Philips® (now NXP) I2C slaves)
■ Programmable output power control meets Class 2 or Class 3
requirements
■ Class 1 operation supported with external PA and T/R switch
■ Integrated ARM Cortex™-M3 based microprocessor core
■ On-chip power-on reset (POR)
■ Support for EEPROM and serial flash interfaces
■ Integrated low-dropout regulator (LDO)
■ On-chip software controlled power management unit
■ Three package types are available:
❐ 32-pin QFN package (5 mm × 5 mm)
❐ 40-pin QFN package (6 mm × 6 mm)
❐ 64-pin BGA package (7 mm × 7 mm)
■ RoHS compliant