Beijing Silk Road Enterprise Management Services Co.,LTD |
Verified Suppliers
|
|
High Precision Wear Resistant 1.14 G/Cm³ PA66 Plastic Plain
Bearings
Generally the inner and outer rings made with POM or PA, Cage made
with PA66 and the balls made with glass, stainless or
ceramic. Material PA have excellent mechanical strength and
wearing resistance, PA66 High Precision Plastic Bearings is
suitable for manufacturing precision plastic bearings. Plastic
bearing made with POM is the most extensive sort of all the plastic
bearings.
The Density of PA66 plastic bearings is 1.14 g/cm3, Sliding
friction coefficient is 0.35-0.42, Short-time highest application
temperature is 170℃.
PA66 High Precision Plastic Bearings could be used in some alkaline
environment but not proper to some acid corrosion environment. With
good self-lubrication performance and low friction coefficients,
PA66 High Precision Plastic Bearings could be used in precise and
high speed application.
Basic properties of staple engineer plastic | ||||||||
Material | HDPE | PP | POM | PA66 | PVDF | PPS | PTFE | PEEK |
Long-time working temp. | 90 | 100 | 110 | 100 | 150 | 230 | 260 | 280 |
Density | g/cm3 | 0.91 | 1.42 | 1.14 | 1.77 | 1.35 | 2.18 | 1.32 |
Ball indentation hardness | 50 | 80 | 170 | 170 | 80 | 190 | 30 | |
Tensile stress | 25 | 30 | 70 | 80 | 50 | 75 | 25 | 95 |
Sliding friction coefficient | 0.29 | 0.3 | 0.34 | 0.35-0.42 | 0.3 | 0.08-0.1 | 0.3-0.38 | |
Melted temperature | 130 | 165 | 175 | 260 | 172 | 280 | 327 | 343 |
Short-time highest application temperature | 90 | 140 | 150 | 170 | 150 | 260 | 260 | 300 |
Coet of Inear expansion (10^-5/K) | 13-15 | 17 | 10 | 8 | 13 | 5 | 12 | 5 |
Dielectric constant at 1 Mhz(10^6HZ) | 2.4 | 2.25 | 3.7 | 3.6-5 | 8 | 2.1 | 3.2-3.3 | |
Volume resisrivity (Ω·cm) | >10^15 | >10^24 | >10^14 | 10^13 | 10^12 | >10^13 | 10^14 | 10^13 |
flammability UL94 | + | + | - | (+) | (+) | - | + | + |
Anti-weathering | - | - | - | - | - | - | + | - |
Note: + =resistant; (+) =partly resistant; - =non-resistant |
Chemical properties of Engineer plastic | |||||||||
Chemical Composition | Material | ||||||||
PI | PEEK | PTFE | PVDF | PA66 | POM | PP | HDPE | ABS | |
Acrtate | + | + | + | (+) | (+) | + | + | (+) | + |
Formic acid (10% water) | + | + | + | + | - | - | + | + | + |
Ammonia (10% water) | - | + | + | + | + | (+) | + | + | + |
Aether | + | + | + | + | + | + | + | ||
Petrol | + | + | + | + | + | + | (+) | (+) | (+) |
Bori acid (10% water) | + | + | (+) | + | + | + | + | + | |
Aminoform | + | + | + | - | - | (+) | - | - | |
Aeti aid 100% | (+) | - | + | - | - | + | + | - | |
Aceti aid (10% water) | + | + | + | - | (+) | + | + | + | |
HF | + | - | - | + | + | (+) | |||
Formaldehyde aqu (30% water) | + | + | + | + | - | + | + | + | |
Glycerin | + | + | + | + | + | + | + | ||
Iodine, Glycol | + | + | (+) | - | (+) | + | + | (+) | |
K2Cr2O7 (10% water) | + | + | + | - | + | + | + | ||
KMnO4 (1% water) | + | + | + | + | - | (+) | + | + | (+) |
2-Hydronyprpionic 10% | + | + | + | - | - | + | + | - | |
2-Hydronyprpionic 90% | + | + | + | + | + | (+) | + | + | + |
Nad (10% water) | + | + | + | + | + | + | + | + | + |
NaNO3 (10% water) | + | + | + | + | + | + | + | + | |
NaOH (50% water) | + | + | + | + | - | + | + | + | |
NaOH (5% water) | + | + | + | - | + | + | |||
Oxalic (10% water) | + | + | + | + | (+) | (+) | + | + | + |
Tetracarp | + | + | + | (+) | + | - | - | (+) | |
H3PO3 100% | + | + | - | + | + | ||||
H3PO4 (10% water) | + | + | + | - | - | + | + | ||
NHO3 (2% water) | + | + | + | + | - | - | + | + | + |
HCL (2% water) | + | + | + | (+) | - | - | + | + | + |
H2SO4 98% | - | + | - | - | + | (+) | - | ||
Soap liquid | + | + | + | + | + | + | |||
Alkaliliquid (10% water) | + | + | + | + | + | + | + | ||
Toluene | + | + | + | + | + | + | + | (+) | - |
Water, cold | + | + | + | + | + | + | + | + | + |
Water, hot | + | + | + | (+) | - | + | + | + | |
H2O2 (30% water) | (+) | + | + | - | - | + | + | + | |
H2O2 (0.5% water) | + | + | + | - | (+) | + | + | + | |
Asphalt | + | + | (+) | + | (+) | (+) | |||
Note: + =resistant; (+) =partly resistant; - =non-resistant |