Waterproof Firefighter Coveralls , Fire Resistant Insulated Coveralls ZFMH - FZ

         EN136 Navy the flame retardant fireman suit with CE MED certificate

Product display:                                                                                            

Product Introductions and Structure:                                                              

Firefighters fire protective clothing in accordance with EN469: 2005 is designed for fire officers and social enterprises full-time or part-time firefighters daily fire, emergency (but not to having hazardous chemicals, gas, viruses, nuclear radiation, and other special environment wearing), when the relief wear.

Product Technical Specification:                                                                    

◆ fabric flame retardant properties: length of damage ≤90mm, continued burning time ≤2s

◆ fabric strength: Tear strength ≧ 100N, breaking strength ≧ 850N

◆ thermal stability: After 260 ± 5 ℃ thermal stability test, the warp and weft shrinkage ≤2%

◆ waterproof breathable layer of hydrostatic pressure washed after 25 times greater than

    50KPa, water vapor permeable properties ≧ 5000g / m² • 24h, according to oil ≧ grade 3

◆ four-layer structure of TPP> 32cal / cm²9. Visible horizons greater than 120 °

Maintenance Requirements:                                                                            

  Preparation before use in accordance with the protection of media protection and air supply means selection applies. According to the user's height and the size of hand, foot and to use the appropriate protective boots and gloves, and install the pinch seal on protective clothing.
  Check the ministries connected correctly, sealing is reliable, clothing materials harmony lens is aging, discolored or damaged. Check the gas supply device is normal, according to the terms of its gas supply apparatus equipped with provisions of the Manual to be checked.
  Note the use of a portable breathing apparatus when used in combination, when the respirator issued residual gas alarm, the user should be immediately evacuated. Car and long tube breathing apparatus when used, should be located in the device at a supervised parking, always observe the high, medium gauge value changes, and keep in touch with people working in the field, when the air supply breathing apparatus found abnormal phenomenon, shall immediately notify the person within the site evacuated. Users feel sluggish breathing, discomfort or tear discovery pipeline road, stuck, protective clothing tear fault should evacuate immediately following the scene. If the fire accident scene, after the initial fire extinguishing invalid, should be immediately evacuated.
 

Used and Store Maintenance :                                                                        

  After taking protection immediately with decontamination temperature at the end of the decontamination, removal of contaminants remnants, then rinse with water, hung in a cool ventilated place to dry naturally.

Protective clothing should not be folded and stacked, should be hung in a clean and dry place, in order to avoid being affected by sun exposure, toxic gases, corrosive media abuse.

  Protective clothing should be applied inside and outside surfaces of talcum powder and smear grease on the sealing zipper lubricants, adhesion prevention, aging, to ensure life. Protective clothing storage conditions at aging general store for three years. Protective clothing should be checked regularly maintained to ensure safety and proper function play base.

Transportation:                                                                                               

F.A.Q:                                                                                                            

Q. WHAT'S A FIREMAN SUIT?

A.A fire proximity suit (also, silvers, silver bunker suit, or asbestos suit) is a suit designed to

   protect a firefighter from high   temperatures, especially near fires of extreme temperature

   such as aircraft fires. They were first designed and used in the 1930s.

Q. ARE YOU THE MANUFACTURER OT THE TRADING COMPANY ?

A. We are the own manufacturer and the trading in order supply  a complete services.

Q. WHY WE CHOOSE YOU ?WAHT'S YOUR STRENGTH ?

A. We are experienced and professional, we offer high quality products, perfect services

     and complete business services.Help U to collect others goods in China.

Q. WHAT IS YOUR DELIVERY TIME ?

 A. Normally, received your deposit, we could finish the production within 7-30days.

Q. CAN YOU CUSTOMIZE THE PRODUCTS AS PER OUR REQUESTS?

 A. Yes, we offer OEM and ODM services.
      a. Print Logo on the product
      b. Customeized products shell
      c. Customized packing.