|
[China]
Trade Verify
Address: NO.334-1,XiangshanRoad,Luotian community,Songgang Town, Bao'an District, Shenzhen,China. 518105
Contact name:catherine
Shenzhen Kerun Optoelectronics Inc. |
|
Verified Suppliers
|
|
|
0.8inch 16 Segment LED Display Common Cathode Anode SGS Approved
Lightweight 16 Segment LED Display Common Cathode Anode SGS Approved
Super bright various size common cathode or anode 16 segment led display
Product features
1. Extreme short response time, high brightness, low power dissipation and eco saving
2. Can be driven by low current and low voltage
3. Small volume, lightweight, good impact resistance
4. Product packaged in solid state and stable, have good gas tightness
5. Long lift span, could use more than 50 thousand hours
6. Good display effect, wide angel visual
7. Could display in different color, including white, red, orange, yellow,green and blue.
Specification of Segment LED Displays
| Optional Color | Red, Green,Yellow, Pure White, Blue,Others |
| Digit height | 6",8",10",12",15",18",20",24",32", 45", 60" etc |
| Brightness control | auto dimming or handmade dimming |
| Brightness level | 8 level |
| View angle | 50° for standard |
| Service Access | Front or back service |
| Master/Slave | single/double side; master /slave available |
| Cabinet material | Iron cabinet |
| Waterproof rating | IP65 for outdoor product |
| Output Port | 485 driver signal/595 drive signal |
| Working voltage | 12V DC |
| Input Voltage | 110V-230V AC 50/60HZ |
| RF remote distance | ≤100m |
| Operating environment | -30°c to 75°c; 5% to 95% RH |
| Communication Interface | RS232/RS485/TCP/IP |
| Control Method | RF remote, PC, LED remote, LCD remote |
| Installation method | Hang, mount on wall by hook or iron angle, or custom by customer |
| Standard Parts | RF remote, receiving antenna, light sensor, cooling fan, installation parts |
| Place of Origin | Longgang distric, Shenzhen city, P.R.China |
| Driver Pameters | |
| Drive port | One digit |
| Operating voltage | 12V DC |
| Max. current | 2A*8=16A |
| Drive Signal | RS485 |
Customization available.
Various types based on digit quantity (OEM &ODM available)
| Types | Type 1 | Type 2 | Type 3 | Type 4 |
| Digit quantity | 1 digit | 2 digits | 3 digits | 4 digits |
Different size for 1 digit 7 segment led display (OEM&ODM available)
| digit height | PIN quantity | common joint | Display size | |
| 1 | 0.28inches | 8pins | 1 | 7.40*10.00*6.00mm |
| 2 | 0.30inches | 10pins | 1 6 | 7.60*12.70*7.0mm |
| 3 | 0.32inches | 10pins | 9 7 | 7.00*11.00*5.00mm |
| 4 | 0.36inches | 10pins | 1 6 | 7.50*14.00*8.50mm |
| 5 | 0.39inches | 12pins | 1 6 | 10.00*13.00*7.00mm |
| 6 | 0.40inches | 14pins | 3 14 | 9.80*18.70*5.10mm |
| 7 | 0.43inches | 10pins | 3 14 | 11.00*18.80*6.50mm |
| 8 | 0.50inches | 10pins | 3 8 | 12.70*19.00*8.00mm |
| 9 | 0.52inches | 10pins | 3 8 | 12.60*17.50*7.00mm |
| 1 0 | 0.56inches | 10pins | 3 8 | 12.60*19.00*8.00mm |
| 1 1 | 0.60inches | 10pins | 3 8 | 18.00*25.00*8.30mm |
| 1 2 | 0.80inches | 10pins | 3 8 | 20.00*27.70*10.00mm |
| 1 3 | 1.00inches | 10pins | 3 8 | 24.00*34.00*10.50mm |
| 1 4 | 1.20inches | 10pins | 1 5 | 28.80*40.80*8.00mm |
| 1 5 | 1.50inches | 10pins | 1 5 | 30.60*44.00*8.00mm |
| 1 6 | 1.80inches | 10pins | 1 5 | 38.00*56.00*11.00mm |
| 1 7 | 2.30inches | 10pins | 1 5 | 47.80*69.70*12.00mm |
| 1 8 | 3.00inches | 10pins | 3 8 | 65.00*85.50*12.00mm |
| 1 9 | 4.00inches | 10pins | 1 8 | 90.00*122.00*15.00mm |
| 2 0 | 5.00inches | 10pins | 3 8 | 105.00*140.00*16.00mm |
Our Compnay
Shenzhen Kerun Optoelectronics co.Ltd. was established in Sept.,
2010. Our traditional products include LED dot matrix package and
LED display which are mainly used in high-speed railway projects at
home and abroad. At the same time, Kerun has stepped into R&D,
production and supporting for home appliance display panel and
intelligent home control, guiding and terminal equipment, proving
to be the leading brand in large home appliances and smart guiding
screen fields.
At present, Kerun has a manufacture base covering more than 10,000
square meters, with more than 500 employees and more than 100 world
class LED fully automated packaging production lines, independent
R&D center and advanced burn-in and test center.
QC&QA
- Three times of inspection on all products on production:
Step 1；raw material check
Step 2: process check and full inspection after chip&wire bonding
Step 3: full test before packing and partial check before shipment
Application:
FAQ
Q1: Can I get a sample order?
A1: Yes, we welcome sample order to test and check quality.Mixed samples are acceptable.
Q2: How long to get a sample and the lead time for mass production?
A2: Normall samples lead time is 3~5 days; mass production lead time is 15~30 working days.
Q3: How to proceed the order if I have logo to print?
A3: First, Artwork for visual confirmation, and next is Sample picture or sending sample to you for confirmation, finally we will go to mass production.
Q4: Do you offer guarantee for the products?
A4: Yes, we offer one year guarantee for the products.
