Home Companies Ain Technology (Shenzhen) Co., Ltd

DM-360 Dual Element Passive Alarm Infrared Detector

Active Member

Contact Us

[China]

Address: No. 301A, 3F, C6 Bldg, Hengfeng,No 739 Zhoushi Rd,Hezhou, Hangcheng, Bao'an, Shenzhen City, 518000 China

Contact name:Spring_zhang

Ain Technology (Shenzhen) Co., Ltd

DM-360 Dual Element Passive Alarm Infrared Detector

Country/Region	china
City & Province	shenzhen guangdong

Product Details

INDOOR DUAL PASSIVE INFRARED DETECTOR

DM-360 is a completely of new product of dual passive infrared detector which can provide high

quality and safety of indoor ,When it detects the invasion of illegal area,it will notify the user timely ,

The Passive Indoor Ceiling Mounted Infrared Detector of high-performance, anti-white light &anti-electromagnetic interference and eliminate the false alarming such features.

it has the following characteristics:

Anti-glare protection
Strong anti-interference ability,high anti-false alarm
Microwave detection
Intelligent temperature compensation,it can work stably even in high temperature conditions
High density detection area
Anti-tamper switch protection
Using microprocessor chip design,with advanced motion analysis
IR Detector: Less amplification & less gain for false alarms.
World-class immunity to shock, white light, temperature, RF, electrical surges.
- Spring Clips mounting for drop ceiling.

1. SPECIFICATIONS

MODEL	DM-360
Detection Range	Coverage10m diameter (Mounting height 3m)
Input Voltage	10〜16V DC
Operating Current	20mA(max.)
Sensitivity	2°C(0. 6m/sec)
Warm-up Period	35±5sec
Alarm Period	2.0±0.5sec
LED Indicator	Red Alarm LED(Selectable On/Off)
Alarm Output	N.C., 20V DC 100mA max.
Tamper Output	N.C.,Open when cover is removed. 30V DC,0.5A max.
Mounting Height	7.8 〜11.8ft (2.4〜3.6m)
Operating Temp.	14°F ~ 131°F (-10C〜55C)
Environmen Hum	95% max.
Weight	4.2 oz (121g)
Dimensions	4.72"DIA.x1.61" H (120mmDIA.x41mm H)

2. DESCRIPTION AND OPERATION

3. INSTALLATION HINTS

4. DETECTION PATTERN

5. INSTALLATION

6. WIRING

7. TROUBLE SHOOTING AND MAINTENANCE

TROUBLE	TROUBLE CAUSE	REMEDY
Unit does not power up.	No or low input power.	Apply proper input voltage.
Unit does not power up.	Input power polarity reversed.	Correct wiring polarity.
Alarm LED does not light.	LED jumper is set to “LED OFF”.	Set LED jumper to “LED ENABLE”(See Section 2).
Alarm LED does not light.	Incorrect sensor mounting height.	Increase /decrease mounting height.

TROUBLE	TROUBLE CAUSE	REMEDY
Alarm LED/Relay triggers without movement in detection area.	Unsecured environment:Animals / rodents in detection area .	Block access of animals / rodents.
	Heater/air conditioning equipment in sensor view.	Re-aim sensor.
	Direct sun or headlights in sensor view.	Add curtain / shade to block light sources.
LED indicates alarm, no alarm output.	Incorrect wiring at alarm output terminals.	Correct wiring fault.
	Lightning damage.	Replace sensor.
Alarm LED on constantly, no fault in protected area or wiring.	Defective unit.	Replace sensor.
Unit continues to operate after the input power has been disc-onnected.	The wire to the “ - ” power input was disconnected, the“ + ” is still connected. the power can now find a return path through the Alarm Output protection device and alarm wiring.	Disconnect wire from the “ + “ power input.

8. NOTES

1. The product shall be installed indoor and do not use it under the following conditions.
① In the place where it is likely to be exposed to dust, high humidity,high temperatures,or rain.
② In the place where it is closed to magnetic field.
③ In the place where vibration or shock is directly transmitted to the product.
2. In order to ensure the normal operation of the product. It should be cleaned and maintained regularly.
① Please power off before cleaning the product.
② Do not use chemical detergents to clean the product.
3. Never disassemble, repair and modify the product.
4. The product comply with the SJ/T11363-2006 Standard and requirements of RoHS.
5. Specifications and design are subject to change without prior notice.