Home Companies Hebei Reking Wire Mesh CO.,Ltd

2mm * 2mm Cardboard Division Non Stick PTFE Conveyor Belt

Hebei Reking Wire Mesh CO.,Ltd
Active Member

Contact Us

[China] country

Address: Floor 20,Wangjiao building,North xinshi road,Qiaoxi district,Shijiazhuang,Hebei,China P.C.:050051

Contact name:

Inquir Now

Hebei Reking Wire Mesh CO.,Ltd

2mm * 2mm Cardboard Division Non Stick PTFE Conveyor Belt

Country/Region china
City & Province shijiazhuang hebei
Categories Rubber Belts
InquireNow

Product Details

2 mm*2 mm High Quality teflen Fiberglass Mesh Conveyor Belt For Cardboard Division

 

 

Description of the teflen conveyor belt:

 

teflen mesh conveyor belt is coated with teflen resin on the basis of glass fiber mesh to form teflen mesh conveyor belt; teflen mesh conveyor belt mainly defines the size of mesh size, mainly 1×1MM, 2×2MM, 4×4MM, 10×10MM and other meshes, and are divided into single-latitude teflen mesh belt and double-latitude teflen mesh belt according to different warp and weft.

 

All teflen conveyor belts must be ringed for practical use, so the teflen conveyor belt joint is a critical preparation step. The quality of the joint directly affects the service life of the conveyor belt and whether the conveyor line can run smoothly and smoothly.

 

1, the method of the joint

 

2. teflen conveyor belt joints

 

3. Joints of PVC and PVG whole core flame retardant conveyor belts

 

4. teflen conveyor belt joints

 

Features of the teflen conveyor belt:


1. Flame retardant.

2. teflen has weather resistance and aging resistance. Through practical application, such as continuous placement at a high temperature of 250 ° C for 200 days, not only the low strength will not change, but also the weight is not reduced; placed at a high temperature of 350 ° C, 120 hours, the weight is only reduced by about 0.6%; at 180 The original softness can be maintained at a low temperature of °C.

3. teflen conveyor belt has good dimensional stability (elongation coefficient less than 5‰) and high strength. Good mechanical properties.
4. Breathability - The gas permeability of the conveyor belt reduces heat source consumption and improves drying efficiency.

5. The teflen conveyor belt is non-tacky: it does not easily adhere to any material. Easy to clean all kinds of grease, stains or other fixtures attached to the surface; almost all adhesives such as pastes, resins, paints, etc. can be removed;

6. Anti-bending fatigue can be used for smaller wheel diameters.

Specification of the teflen conveyor belt:

 

ItemHole sizeMaterialThicknessweightTemperature resistanceMaximum widthTensile strength
W-O5J1x 1mmGlass fiber0.5mm370g /m 2-70 -260 ℃4m310/290 N/cm
W-07J2x 2mmGlass fiber0.7mm450g /m 2-70 -260 ℃4m350/310 N/cm
W-1J4x 4mmGlass fiber1.0mm400g /m 2-70 -260 ℃4m390/320 N/cm
W-2J4x 4mmGlass fiber1.0mm450g /m 2-70 -260 ℃4m390/320 N/cm
W-12KJ4x 4mmGlass fiber1.2mm600g /m 2-70 -260 ℃4m895/370 N/cm
W-3J4x 4mmGlass fiber1.0mm500g /m 2-70 -260 ℃4m395/370 N/cm
W-4J4x 4mmGlass fiber1.0mm500g /m 2-70 -260 ℃4m900/600 N/cm
W-5J4x 4mmGlass fiber1.0mm550g /m 2-70 -260 ℃4m395/370 N/cm
W-12J10x 10mmGlass fiber1.2mm450g /m 2-70 -260 ℃4m360/300 N/cm
NW-14J0.5x 1mmGlass fiber0.5mm420g /m 2-70 -260 ℃4m310/290 N/cm
W-09J2x 2.5mmGlass fiber0.9mm600g /m 2-70 -260 ℃3m390/320 N/cm

 

Application of the teflen conveyor belt:

 

1. Anti-adhesion lining, gasket, mask and conveyor belt;According to the thickness, it is used for the conveyor belt of various drying machinery, adhesive tape, sealing tape and so on.
2. Welding of plastic products and welding cloth for sealing;Plastic sheet, film, hot sealing strip.
3. Heat-resistant coating;Laminated base material, thermal insulation package.
4. Microwave gasket, baking sheet and food drying;
5. Adhesive tape, transfer printing press cloth, carpet back adhesive curing conveyor belt, rubber vulcanization conveyor belt, abrasive sheet solidification separation cloth and so on.
6. Construction film materials: roof of various sports venues, station pavilion, parasol, landscape and so on.
7. Used for corrosion protection of various petrochemical pipelines, environmental protection desulfurization of power plant exhaust.
8. "anti-static cloth" can be made after special processing.

 

 

 

Hot Products

PTFE coated fiberglass mesh sheets As Screen Printing Materials For Cardboard Division Description ...
4mm High Temperture PTFE teflen Mesh Coated Fiberglass Coveyor Belt 4000 mm Description of the ...
4 MM×4 MM teflen Conveyor Belt Coated Fiberglass Red Edge For Printing Description of the teflen ...
4*4 mm teflen Coated Fiberglass Mesh Conveyor Belt For Cardboard Division For Drying Description of ...
2 mm*2 mm High Quality teflen Fiberglass Mesh Conveyor Belt For Cardboard Division Description of ...
4mm×4mm teflen conveyor belts mesh belt for polyester nonwoven materials Description of the teflen ...