Active Member
|
[China]
Address: Floor 20,Wangjiao building,North xinshi road,Qiaoxi district,Shijiazhuang,Hebei,China P.C.:050051
Contact name:
Hebei Reking Wire Mesh CO.,Ltd |
|
|
Super Precision Stainless Steel Screen Printing Mesh For Chemical Industry
Description :
The type 316
Stable 2% molybdenum and T316 are an "18-8" alloy.Type 316 has better resistance to pitting.
Compared with other chromium nickel stainless steel brine corrosion,sylph-bearing water or halogen salt, chloride and other gifts.A valuable property T316 has high creep strength at high temperature.Other mechanical properties and manufacturing characteristics are similar to T304.
Silk braided T316 has been widely used in chemical processing for corrosion resistance better than conventional chromium nickel types.Type 316 L.
Silk braided T316 has been widely used in chemical processing for corrosion resistance better than conventional chromium nickel types.Type 316 L.
T316 316 L is very similar, the difference is to reduce the carbon content for better silk fabric weaving and secondary welding characteristics.
| material | SUS304N, 316L,304HPS |
| weave type | plain weave |
| Mesh/inch | 40*40-500*500mesh/inch |
| wire diameter | Min diameter is 0.018mm-0.16mm |
| aperture size | the size is from 0.033mm-0.475mm |
| hole shape | square,rectangle,special |
Featuers :
High tension.Much higher tension than common polyester mesh,and this property is very stable.
Low Elongation: Very small elongation of wire mesh at igh tension.
High-Flexibility: The wire mesh will not lose elasticity at extremely tension.
High-Corrosion Resistance: The excellent corrosion resistance of stainless steel wire exceeds polyester fiber.
Non-electrostatic: To avoid affects of nonelectrostatic for printing and ensure the safety of printing.
Good Solvent Resistance: To avoid the affects of any solvents to wire mesh and to ensure the safety of printing.
Specification :
| Specification | Mesh/inch | Wire Dia (mm) | Open area Ratio(%) | Apereture (mm) | Thickness(mm)
| Calendered Thickness (mm)
| Theoretical lnk(cm^/m^) |
| 40*40*0.16 | 40 | 0.16 | 56.0 | 0.475 | 0.3-0.32 | As order | 179.1 |
| 60*60*0.12 | 60 | 0.12 | 51.3 | 0.303 | 0.23-0.245 | As order | 123.2 |
| 80*80*0.12 | 80 | 0.12 | 39.0 | 0.198 | 0.235-0.245 | As order | 92.9 |
| 80*80*0.09 | 80 | 0.09 | 52.0 | 0.228 | 0.175-0.18 | As order | 103.0 |
| 80*80*0.05 | 80 | 0.05 | 71.0 | 0.268 | 0.095-0.1 | As order | 78.0 |
| 100*100*0.1 | 100 | 0.1 | 36.8 | 0.154 | 0.195-0.205 | As order | 77.2 |
| 120*120*0.08 | 120 | 0.08 | 39.0 | 0.132 | 0.155-0.165 | As order | 65.8 |
| 150*150*0.06 | 150 | 0.06 | 41.7 | 0.109 | 0.115-0.124 | As order | 50.0 |
| 165*165*0.035 | 165 | 0.035 | 60.0 | 0.119 | 0.07-0.075 | As order | 48.0 |
Application :
Solar battery,
Pinted Circuit Board(PCB),
Chip Electrical components,
Flat Panel Display,
Liquid Crystal Display(LCD),
Plasma Display Panel(PDP) ECT.
