|
[China]
Trade Verify
Address: 16th Yufeng Road, HuaDu District , Guangzhou,China
Contact name:Yarly ，Carolyn
Kinte Materials Science and Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
Two-component Epoxy Water-based Paint for Transmission Shaft Anti-corrosion Protection
◎Introduction
AE-29003A is composed of water-based modified epoxy resin,
polyamine curing agent, deionized water, water-based additives,
co-solvents, environmental protection pigments, fillers, etc.
It is widely used in the coating of the surface of metal substrates
used in transmission shafts, shock absorbers, steering columns and
other products. It plays a very good role in decoration and
anti-corrosion protection. It is suitable for manual spraying and
DISC electrostatic spraying.
◎Features
No irritating smell.
It meets the DISC electrostatic spraying process and has good
construction adaptability.
After curing, the paint film has excellent abrasion resistance,
stacking resistance, neutral salt spray, impact resistance and
chemical resistance.
The products meet the standards of toxic and harmful substances in
auto parts.
◎Film Properties:
| Test Item | Result | |
| Drying time (25℃) | Surface dry time: 1h; | Fully cured in 7 days |
| Using drier: 80-90℃×30min | ||
| Adhesive (scratch) | Grade 1 | |
| Pencil hardness (HB) | H | |
| Impact (50kg•cm) | Pass | |
| Flexibility | 1mm | |
| Corrosion resistance | >360h | |
| Water resistance | >300h | |
◎ Instructions
| Composition | Component A (black liquid) Specific gravity 1.33±0.05 |
| Mix proportion | 12:1 (Weight ratio) |
| Mass solid content (105℃×3h) | 45±5% |
| Mix method | After mixing component A, add component B and fully mix evenly |
| Coating thickness | Dry film thickness 30-50μm; |
| Diluent | Deionized water, add about 0~10% |
| Curing period(25℃) | -- |
| Pot-life(25℃) | 2h |
| Recoating interval | Minimum 4h |
| Pretreatment of substrate | When directly applied to the surface of the substrate, the substrate should be treated with phosphating, vitrification, and silanization, and it must be clean, dry, rust-free, and oil-free. |
| Substrate temperature | Substrate temperature should be higher than dew point by 3℃ |
| Construction Conditions | The construction temperature is 10-35℃, the humidity is 30-75%, and
the ventilation conditions are good. |
| Process | Substrate - Rust removal, degreasing, dust removal, phosphating, silane, vitrification treatment - Moisture drying - Spraying water-based paint - Leveling at room temperature for 5-10 minutes - Gradient heating, 90-100 degrees 30 minute artifact - Off-line packaging |
| Coating method | DISC electrostatic spraying: |
| Applicable substrate: | Suitable for cast iron, galvanized sheet, carbon steel, cast aluminum and other metal substrates |
| Clean | Wash tools and equipment with clean water immediately after construction |
| Storage life | The storage period of the paint is six months, please be sure to use it up within the storage period, so as not to affect the quality; the paint (including curing agent, thinner) should be sealed and stored in a cool place, waterproof, leakproof, sunscreen, high temperature, and away from fire. |
| Package | Component A: 18kg/barrel |
◎Company Profile:
Kinte Materials Science and Technology Co., Ltd. is subordinate to
China Machinery Industry Corporation (a key state-owned enterprise
directly managed by SASAC, ranking 284 among the world's top 500 in
2021). It is a national high-tech enterprise under China National
Electric Apparatus Research Institute Co., Ltd. (Stock Code:
688128), a listed enterprise on the SSE STAR MARKET. Focusing on
the R & D, production, and sales of environmentally friendly
coatings (powder coatings, waterborne industrial coatings) and
powder coating resins, the company is committed to improving the
global market competitiveness of China's environmentally friendly
coating industry. Now it has become the leader and promoter in
China’s technological development of environmentally friendly
coatings as well as polyester resins for powder coatings!
We have gained ISO9001 and ISO14000, ISO18001, RoHS, UL
certification and QUALICOAT Certificate. Due to the excellent and
stable quality, our products always enjoy high reputation at home
and oversea, and were sold to more than 30 countries. Our clients
include many top air conditioning manufacturers in the world such
as GREE, Midea, TICA, TRANE, etc.
We unremittingly stick at the business principle of “Quality is the
life, adhere to first-class technology, first-class quality,
first-class cost and first-class brand”. We would like to provide a
complete set of services and solutions for both domestic and abroad
customers and would like to go forward to brilliant future with you
together.
