Home Companies Dongguan ShuangYi Electronic Technology Manufacturing co., LTD

USB 2.0 A Male USB Charging Connector , Plug Jack Mounting Solder 4 Pin PCB Connector

Active Member

Contact Us

[China]

Address: Address: North 1st Rd,No.3,Chikan district,Shipai town, 523346 Dongguan City, China

Contact name:Charlotte

Dongguan ShuangYi Electronic Technology Manufacturing co., LTD

USB 2.0 A Male USB Charging Connector , Plug Jack Mounting Solder 4 Pin PCB Connector

Country/Region	china
City & Province	dongguan guangdong
Categories	Connectors

Product Details

USB 2.0 A Male USB Charging Connector , Plug Jack Mounting Solder 4 Pin PCB Connector

Product Name : USB2.0 A Type Female Plug;Type : Solder Type

Dimension : 2 x 1.2 x 0.45cm/ 0.8" x 0.5" x 0.18"(L*W*H);Material : Metal, Electric Parts

Main Color : Silver Tone, Black

Weight : 20g

Package Content : 10 x USB2.0 A Type Female Plug Connector

Product Description:

This USB A Type Female plug connector can be used very widely.

Good replacement for the old and damaged ones.

Features:
1. With A Type/B Type/C Type and Mini USB variety of types of public Socket Interface Design;
2. Installed in the form of DIP/SMT/clip wire/wire type available;
3. Flexible design of terminal contact area to ensure good contact performance and long life requirements;
4. Meet a variety of welding equipment parameters temperature requirements

Welding conditions:
1. Hand soldering
Use a soldering iron of 30 watts, controlled at 350º C approximately 3 seconds while solder applying.
2. Wave soldering/Reflow Soldering
The peak temperature of the wave oven should be set to 260º C max. Condition for soldering temperature

Material:
1. Housing: PBT White/Black
2. Terminal: Phosphor Bronze Plating Gold/Tin
3. Shell: BRASS Plating Ni
4. Salt spray test for 48 hours:

Applications:
The can be used in mobile phones, CD players, cordless telephones, MP3, MP4 PDA notebooks, DVD and digital camera.

Specification:

Eelectrical Characteristics
Contact Curren Rating	0.5A Min.
Voltage Rating	40V AC (rms)
Withstanding Voltage	500V AC for 1 Min.
Insulation Resistance	100 Megaohms Min.
Contact Resistance	30 mΩ Max.
Mechanical Characteristics
Insertion Force	44.1 N (4.5kgf) Max
Withdrawal Force	9.8 N (1.0kgf) Min.,3 9.2N( 4.0kgf) Max.
Durability	10000 cycles at 100±50 cycles per hour
Environmental Characteristics
Operating Temperature	-25ºC to +85ºC

Inspection for USB Connector:

Test Description	Requirement	Procedure
Visual Inspection	The inspection results should be compliant with the individual specification	Before the qualification test, all these components shall be examined the Features, Construction as per applicable specification and documents

Mechanical Performance:

Test Description	Requirement	Procedure
Terminal/ Housing Retention Force	0.40kgf /Pin Min.	Measure the contact retention
Insertion Force & Withdrawal Force	Insertion Force: 4.50kgf Max. Withdrawal Force: 1.00kgf Min.	The specimen is mounted to mounting fixtures by the normal mounting means. The peak force shall be recorded at the maximum rate of 25mm per minute
Durability	After 10000 cycles test, shall be no evidence of mechanical or electric defects, and shall meet the requirements of connector using.	10000 insertion / extraction cycles at a maximum rate of 100±50 cycles per hour.