Active Member
|
[China]
Address: No.7,shihuan road, sangyuan industrial district, Donguan city,Guangdong province, China
Contact name:Michael Lu
Dongguan Bai-tong Hardware Machinery Factory |
|
|
Stainless Steel Body Manual Wet Sandblast Cabinet For Heavy Mould Surface Treatment
Technical Specifications:
| Technical specifications | Chamber dimension | 1200X1200X900mm |
| Load Capacity | less than 50kgs or customized | |
| Motor for pump | AC220v,50Hz, 1100w | |
| Air consumption | 0.8~1.2m³/min | |
| Air pressure | 0.3~0.7MPa | |
| Diameter of blasting hose | Φ13mm*23mm | |
| Lighting | AC220v, 13w,LED | |
| Quantity of blast gun | 1pc | |
| Initial media feeding | 5~10kgs(together with 25kgs water) | |
| Power supply | 220v, 50hz; optional 380v, 50hz |
Wet sandblasting cabinet
Model: 1212W-F
Stainless steel 304 body
Manual sandblasting machine
Dimension of work cabinet: 1200X1200X800mm
Motor for pump: 220V, 50Hz, 1100W, optional 380V, 50Hz, 1100W
Long life PU pump
5KGS abrasive media and 25KGS water for first feeding
Pneumatic pedal switch
Energy saving lamp inside cabinet
One wet sandblasting gun
Boron carbide nozzle inside sandblasting gun, size of nozzle
8*20*60mm
Fan exhaustor for water fog, 220V, 50Hz, 38W, 2pcs
Wet Sandblaster Series(Fibre Glass Body):
| model | dimension of cabinet(mm) | quantity of gun | raw material of cabinet | remarks |
| 6868W | 680X680X600 | 1pc | fibre glass | optional s/s body |
| 9065W | 900X650X600 | 1pc | fibre glass | optional s/s body |
| 9090W | 900X900X700 | 1pc | fibre glass | optional s/s body |
| 1212W | 1200X1200X800 | 1pc | fibre glass | optional s/s body |
1. Pretreatment: Electroplating, spray paint, spray, etc. All are
covered sandblasting before machining, surface is absolutely clean,
at the same time greatly improve the coating adhesion and corrosion
resistance ability.
2. Clean up: Casting parts, stamping parts, welding parts, such as
metal artifacts to scale, residue, dirt; Cleaning the surface of
non-metallic products, ceramic embryo dark spots on the surface of
the clear lacquer and reduction pattern, etc.
3. Old refurbished: Automobile, motorcycle, mechanical and
electrical equipment and clean all moving parts. At the same time,
eliminate fatigue stress, prolong service life.
4. Finishing: All metal and non-metal products (plastic, crystal,
glass, etc.) can eliminate surface, dumb matte processing, make the
product surface level.
5. Mold processing: Mold surface and matte treatment, graphic
production, as well as mold cleaning, do not hurt and die surface,
ensure accuracy of mould.
6. Burrs treatment: Small burr removal machining parts, plastic
injection parts glue burrs.
7. Bad product rework: Bad product coating removal, remove bad
surface coloring and printing.
8. Enhance the hardness on the surface of the metal, eliminate
stress, such as the plane leaves, spring, mechanical cutters and
weapons and other surface treatment.
9. Etching antiskid processing: Etching pattern in the surface of
metal products and non-metallic products, words and antiskid
processing, such as marble, handle non-slip, seal, stone lettering,
etc.
10. The processing of jeans: Jeans sanding, pale and cat must
effect is achieved.
