Home Companies Shanghai Saintenna Wireless Technology Co., Ltd.

PCB type 4G full band 4G lte full band PCB antenna manufacturer

Active Member

Contact Us

[China]

Address: Room 601, Building 1, No. 69 Yuanfeng Road, Baoshan District, Shanghai 200444, China

Contact name:George

Shanghai Saintenna Wireless Technology Co., Ltd.

PCB type 4G full band 4G lte full band PCB antenna manufacturer

Country/Region	china
City & Province	shanghai shanghai

Product Details

PCB type 4G full band 4G lte full band PCB antenna manufacturer

Product Description

Item Name	4G LTE FULL Band antenna
Physical Properties
Connect Type	SMA-J
Operating Temperature	-40~85°
Storage Temperature	-40~95°
Electrical Properties
Frequency Range	690~960MHz 1400~2170MHz 2300~2700 MHz
Impedance	50Ω
VSWR	<2
Efficiency	67%
Peak Gain	4dbI

Reliability test report

1 Humidity

The device shall be placed in 90%~95% relative humidity and at 60℃±3℃ for 48h, then place at 25℃±5℃ and less than 65% relative humidity for 2h

It shall fulfill the specification

2 High Temperature

The device shall be placed at 105℃ for 48h, then place at 25℃±5℃ and less than 65% relative humidity for 2h

It shall fulfill the specification

3 Low Temperature

The device shall be placed at ‐40℃ for 48h, then place at 25℃±5℃ and less than 65% relative humidity for 2h

It shall fulfill the specification

4 Temperature Cycle

The device shall be placed at ‐40℃ for 30 min then at 105℃ for 30 min. Cycling shall be repeated 5 times. At the room temperature for 1h

It shall fulfill the specification

5 Salt Spray Test

The device shall be placed in salt spray box (5% NaCl) at 25℃±5℃ for 24h.

It shall fulfill the specification

6 Vibration Test

The device shall be placed to vibration for 2h each in x,y and z axis with the amplitude of 1.5mm, the frequency shall be varied uniformly between the limits of 10Hz~55Hz.

It shall fulfill the

specification

7 Drop Test

The device shall be dropped naturally to cement floor 6 times from the height 1 meter

It shall fulfill the specification

8 Drawing Force Test

The device shall be placed at push/pull tester at the strength of no less than 10N

It shall fulfill the specification

9 Voltage Resistance

1.Insulation spark voltage 1.5KV

2.Sheath spark voltage 1.5KV

3.Insulation resistance to sheath voltage 0.5KV

It shall fulfill the specification

Specification
1.Physical Properties
 Connect Type.................. SMA-J
 Operating Temperature......... -40～85°
 Storage Temperature........... -40～95°
2.Electrical Properties
 Frequency Range................... 690~960MHz
1400~2170MHz
2300~2700 MHz
 Impedance..................... 50Ω
VSWR............................ ＜2
 Efficiency........................ 67%
 Peak Gain......................... 4dbI

PRODUCT CATEGORY