Active Member
|
[China]
Address: Room 601, Building 1, No. 69 Yuanfeng Road, Baoshan District, Shanghai 200444, China
Contact name:George
Shanghai Saintenna Wireless Technology Co., Ltd. |
|
|
LoRa WAN NB-IoT oem tilt manhole cover remote monitor for IoT antenna
PRODUCT INFORMATION
| Mechanical Specification | |
| Name | 3G Customized fibre-glass epoxy antenna |
| Part Number | SAA31166A |
| Dimension(mm) | ￠13X200 |
| Connect Type | N-J |
| Color | Gray |
| Work Temp. (℃) | -40℃～+85℃ |
| Humidity | <75% |
| Electrical Specification | ||
| Frequency Range(MHz) | 824-960 | 1710-2170 |
| Gain(dBi) | 2 | 4 |
| VSWR | ＜2.5 | ＜2 |
| Polarization | Vertical | |
| Input Impedance(Ω) | 50 | |
| Max Input Power(w) | 10 | |
| Mechanical Specification | |
| Name | WiFi 2.4GHz 5dBi fibre-glass epoxy antenna |
| Part Number | SAA31167A |
| Dimension(mm) | ￠13X200 |
| Connect Type | N-J |
| Color | Gray |
| Work Temp. (℃) | -40℃～+85℃ |
| Humidity | <75% |
| Electrical Specification | |
| Frequency Range(MHz) | 2400-2500 |
| Gain(dBi) | 5 |
| VSWR | ＜2 |
| Polarization | Vertical |
| Input Impedance(Ω) | 50 |
| Max Input Power(w) | 5 |
| Mechanical Specification | |
| Name | 4GHz 6dBi fibre-glass epoxy antenna |
| Part Number | SAA31321A |
| Dimension(mm) | ￠13×200 |
| Connect Type | N-J |
| Color | Gray |
| Work Temp.(℃) | -40℃～+85℃ |
| Humidity | <75% |
| Electrical Specification | |
| Frequency Range(MHz) | 3750-4250 |
| Gain(dBi) | 6 |
| VSWR | ＜2.5 |
| Polarization | Vertical |
| Input Impedance(Ω) | 50 |
| Max Input Power(w) | 10 |
| Mechanical Specification | ||
| Name | 470M 2.5dBi fibre-glass epoxy antenna | |
| Part Number | SAA31268A | SAA31268B |
| Dimension(mm) | ￠20×560 | |
| Connect Type | N-J | N-K |
| Color | Gray | |
| Work Temp.(℃) | -40℃～+85℃ | |
| Humidity | <75% | |
| Electrical Specification | |
| Frequency Range(MHz) | 470-510 |
| Gain(dBi) | 2.5 |
| VSWR | <2 |
| Polarization | Vertical |
| Input Impedance(Ω) | 50 |
| Max Input Power(w) | 5 |
RELIABILITY TEST REPORT
| No. | Item | Test Condition | Remark |
| 1 | Humidity | The device shall be placed in 90%~95% relative humidity and at 60℃±3℃ for 48h, then place at 25℃±5℃ and less than 65% relative humidity for 2h | It shall fulfill the specification |
| 2 | High Temperature | The device shall be placed at 85℃ for 48h, then place at 25℃±5℃ and less than 65% relative humidity for 2h | It shall fulfill the specification |
| 3 | Low Temperature | The device shall be placed at -40℃ for 48h, then place at 25℃±5℃ and less than 65% relative humidity for 2h | It shall fulfill the specification |
| 4 | Temperature Cycle | The device shall be placed at -40℃ for 30 min then at 85℃ for 30 min. Cycling shall be repeated 5 times. At the room temperature for 1h | It shall fulfill the specification |
| 5 | Salt Spray Test | The device shall be placed in salt spray box (5% NaCl) at 25℃±5℃ for 24h. | It shall fulfill the specification |
| 6 | Vibration Test | The device shall be subjected to vibration for 2h each in x,y and z axis with the amplitude of 1.5mm, the frequency shall be varied uniformly between the limits of 10Hz~55Hz. | It shall fulfill the specification |
| 7 | IP5X Test | The device shall be placed in the dust test machine, dust blowing mode, at 35℃ for 4 hours, then turn on dust floating mode, at 45℃ for 4 hours. | It shall fulfill the specification |
| 8 | IPX6 Test | The device shall be placed in spray water in all direction. Nozzle inner diameter 12.5mm, water flow 100±5L/min, for 3min | It shall fulfill the specification |
PRODUCT PICTURE
PRODUCT CATEGORY
Our Main prouct is Wifi antenna, GPS antenna, GNSS antenna, 433mhz antenna, PCB antenna, FPC antenna, 4G lte antenna and so on.
1. Payment available: 100% T/T, Western Union, Paypal and so on.
2. Country of origion: Shanghai, China
3. Delivery terms: By sea or air or express( EMS, DHL, UPS, FedEx, TNT and so on)
