Home Companies Shenzhen Ryder Electronics Co., Ltd.

600Wh Inverter Solar Generator Portable Power Station LiFePO4 Battery For Camping

Shenzhen Ryder Electronics Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: 广东省深圳市龙华区大浪街道华明路浪口华明工业区C栋

Contact name:Vera

Inquir Now

Shenzhen Ryder Electronics Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

600Wh Inverter Solar Generator Portable Power Station LiFePO4 Battery For Camping

Country/Region china
City & Province shenzhen guangdong
Categories Digital Cameras
InquireNow

Product Details

600Wh Inverter Solar Generator Portable Power Station Explorer with Camping LiFePO4 battery 2000 cycle times
 

Renewable solar energy generator - This off-grid portable power station provides 300 watt-hours of power storage. Create a solar power station generator by combining with a 60W solar panel, the built-in MPPT feature enables optimized and infinite clean energy for use anytime/anywhere there is sunlight.
Portable power source – An ideal mobile power source for outdoors adventures or as a backup emergency power, The battery power station is long lasting and provides 5 times the lifespan of typical power stations on available due to the enhanced electrode chemistry.
Portable and user friendly design – Great for outdoor camping and RVs, power station includes various features that make it compact and easy-to use; a large easy-to-read LCD display to see the power station status, a sturdy handle for carrying, built-in LED light for ambient lighting, and cell phone compartment.
Versatile power outputs - Power up to 8 devices at the same time with 2x 110V AC outlets with 200W output, 2x USB ports, 1x USB-C 45W PD port, 1x 12V car port and 2x DC barrel port.
Quality – portable power station is powered by Phosphate based chemistry (LiPO4) technology and includes a built-in battery management system that protects against overloading, over discharging, overcharging, overheating, and short circuits. Certified by FCC, CEC, PSE, and RoHS; includes 2 years warranty from Tenergy.

  • DC INPUT + PD INPUT/OUTPUT )
DC INPUT
ItemMinTypeMaxRemark
Rated Input voltage10V15V25VWhichever Non load or loading
Rated Input current-3A3.5A 
Rated Input power 45W Automatic adjustment according input power
Ripple voltage of charging--200mV

Test from the Input connector, oscilloscope Bandwidth

setup as 20MHZ, parallel with 10uF and 0.1uF capacitor

Input over-current protection--- 
Input Lower-voltage protection--5V 
Input over-voltage protection25V-27V

The devices will stop charging If the Input voltage

exceed the protection voltage

Input port short-circuit protection---Stop charging, components no damage
Input polarity reverse protection---Support(not charging if input polarity reverse)
Input adapter compatibility10-15 VDC
Solar panel charging18-24V with mppt function
Pass through functionThe device can support discharging while the product is charging; the Type-C Output power will drop down to 36W if the product charging via DC Input port.
LCD display of chargingDisplay the charging power and battery capacity
Battery charging suggestion
  1. Suggestion charging the device every 2 or 3 month;
  2. Self consumption: <2mA

 

     

 

 MinTypeMaxRemark
Output voltage range-5%12.0V+5%Constant Voltage Output
Output current-10A-2*DC 5521 port and 1*Car port total output power
Output Power-120W- 

 

Output ripple

 

-

 

-

 

< 200mV

Rated load,oscilloscope Bandwidth setup as 20MHZ, parallel with 10uF and 0.1uF capacitor, the ripple < 800mV while AC Output loading

 

Discharging efficiency

 

>92%

 

-

 

-

Test requirements: test 4 model average efficiency of 25% 50% 75% 100% of full load; test at PCBA board end.
Over current protection11A-13A 

 

Short circuit protection

 

-

 

support

 

-

 

  • DC (5521)Output features
 MinTypeMaxRemark
Output voltage range10.8V12.0V14.6V 
Allowable output current-10A- 
Allowable output power-120W146W 
output current-10A12ACV 12V test
Output ripple--< 150mVRated load,oscilloscope Bandwidth setup as 20MHZ, parallel with 10uF and 0.1uF capacitor, the ripple < 800mV while AC Output loading
Discharging efficiency>92%--Test requirements: test 4 model average efficiency of 25% 50% 75% 100% of full load; test at PCBA board end.
Limited current protection10A-13AThe output will turn off if the output current is exceed specified value; the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button.
Output over-voltage protection15V-16.8VThe output will turn off whenthe product
doesn't work properly and the output
voltage is exceed specified value. 
Short circuit protection-support-The output will turn off and the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button.
       
  • USB1&2 Output features
ItemMinTypeMaxRemark 
Output voltage range4.75V5V5.25V  
Allowable output current-2.4A-  
Allowable output power 12W   
CC Output2.12.42.5ACV 4.75V Test model 
Output ripple--< 150mVRated load,oscilloscope Bandwidth setup as 20MHZ, parallel with 10uF and 0.1uF capacitor, 
Discharging efficiency>92%--Test requirements: test 4 model average efficiency of 25% 50% 75% 100% of full load; test at PCBA board end. 
Limited current protection2.5A 3AThe output will turn off if the output current is exceed specified value; 
Output over-voltage protection6.2V-6.8VThe output will turn off whenthe product doesn't 
 work properly and the output voltage is exceed 
specified value.  
Short circuit protection-

suppor

t

-The output will turn off if the output port is short circuit by wire or external devices; the product will be automatically recovery work normally 
    after cutoff the loading.
         
ItemMinTypeMaxRemark
  •  
  • AC Sine wave output features:
ItemMinTypeMaxRemark
Output voltage range200V220V240V 
Rated output current-0.9A- 
Rated output Power 200W  
Output frequency47 Hz50 Hz53Hz 
Non-loading current  600mA 
Discharging efficiency>85%--Test requirements: test 4 model average efficiency of 25% 50% 75% 100% of full load; test at PCBA board end.
Over loading protection220W-300W

The output will turn off if the output power is exceed specified value;

the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button.

Over temperature protection Of AC board80℃-100℃Tthe output will turn off, the product can be recovery work normally after temperature down and press the key button

Over temperature recovery

Of AC board

70℃-80℃
Fan start55℃ 65℃ 
Fan stop45℃ 55℃ 
Short circuit protection-

suppor

t

-The output will turn off and the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button.

Remark: the fan will stop runing if the the AC board was temperature protection.

  • Automatic power off parameter:
Item MinTypeMaxRemark
USB1 turn-off current- 80 mA100 mA 
USB2 turn-off current- 80 mA100 mA 
DC turn-off current- 50mA80 mA 
AC turn-off power- 3W4W 
TYPE-C turn-off current  50mA80mA 
LED light turn-on- --The automatic will be not available while LED light is turn on.

Remark:

  1. Above parameter value only specified for each one port, the connect more than one port, the turn-off current will count all the port of current.
  2. The default setting is turn-on the automatic power off function,the user can press the DC + AC key button for 3S, the buzzer short ringing 2 times, the automatic power off function will be turn-off; press the DC + AC key button for 3S again, the buzzer long ringing 1 time,the automatic power off function will be recovery work normally;
  3. The automatic power off function also be recovery work normally after re turn-on the product After turn off the product ≥10S.

3.5 LED light function:

LED Current-150mA250 mA 
LED Voltage-18V21V 
LED Power-3.6W5.25W 
Lamp color temp.-4500K- 
Lamp qty. 12  

4.Battery features:

No.contentTesting methodRemark
1Charge cut-off voltage13.8V 
2Discharge cut-off voltage8.8V 
3Standard charge

Under the condition of the ambient temperature of 25±2℃,

Charge the battery at constant current of 0.2C to reach 13.8V. Then charge the battery at constant 13.8V voltage until the charging current decreasing to 0.02C.

 
4Standard dischargeAfter the standard charging,rest for 1 hour then discharge to 8.8V@0.2C. 
5Shipments voltage Quantity of electricity≤30 %
6

Maximum Charge

Current

≤12A 
7

Maximum

continuous working current

≤30AInstantaneous current≤ 60A time≤2S
8Rated capacity

Typical capacity:250000mAh

Minimum capacity:24600mAh-5%

standard

discharge after standard charge

9Operation temperature rangecharge:0~40℃humidity:60±25% 60±25%R.H
discharge:-10~40℃
10Storage temperature≤1 month: -20 ~ 45℃

60±25%R.H

Best 10~25℃ for

  ≤3 months: -10 ~ 30℃long-time storage
≤1 year: 0 ~ 30℃
11Impedance<80mΩ 
12WeightApprox:≈2400g 

5.Environment features:

LCD FunctionOver temperature warning, display the AC ! and buzzer ringing 3 times when temperature protection action
Display current total charging power, discharging power.
The key button’s LED blinking during abnormal of AC i protection action
LED functionkey button with LED
Discharge compatibilityThe specified devices can be quick charge available.
Working temperature

Charging: 0-40 °C

Discharging: -10-40 °C

Storage temperature-20 ~ 45℃
Working Humidity20-90%RH
Storage Humidity10-95%RH
  1. Safety features:

6.1:ESD features:

ESD
  1. Environment temperature:15~27℃;
  2. Humidity: ≤50%;
  3. Test location: available touched metal and other parts.

Contact Discharge

+/-4kv, Normal recovery function allowed

Air Discharge

+/-8kv, Normal recovery function allowed

  1. Dielectric Strength :

Dielectric

Strength

(Hi- pot)

Inverter output L/N VS DC Input

3000VAC 50Hz/10mA(Max)/60 Second,

No breakdown and flashover

 

 
Delivery Time:
 
- Material Preparation Time: 7-15 days (or inventory)
 
- Production & Assembly Time 3-10 days
 
- Testing & Packaging Time: 2-10 days
 
- Total Delivery Time: 30-45days
 
- The faster delivery could be negotiable.
 
Factory photo:
 

 

 



Contact with our sales team for your OEM and ODM order.
 
OEM/ODM Service:
If you want to display your own brand logo in products, bags, labels or anywhere. Or you need to develop battery packs according to your product orientation. Our OEM and ODM services are ready to do it.
 
Packing:
According to Stardard Export Packing.
Carton box, wooden box, wooden pallet

 

Ryder Electronics established in Shenzhen on July 18, 2005, mainly in the business of battery packs. In 2009 the company passed ISO9001 and improved the product quality standard to fulfill the high-end requirements from our customers.
 
In 2012, Ryder Electronics moved to a new facility and expend the production capacity, the Productivity improved nearly 10 times than before.
 
In 2013, Ryder Electronics imported ERP (SAP) system to supervise order execution process.
 
In 2017, Ryder Electronics expanded the SMT, imported high-speed patch machine from Germany.
 
Until now the factory grows into a modern enterprise which integrated injection molding, PCB designing, SMT and battery pack assembling services.
 
In 2018 the company passed ISO14001certification, introduced automated battery production line to further improve the production quality and capacity.

Hot Products

100Ah 5KWH Solar Battery Storage System Wall Mounting 8000cyces 5KWH Energy Storage System ...
MPPT Solar Charge Portable Power Station 10KWh Home Energy Storage System 10KWh Home Energy Storage ...
5KWh Portable Power Station System LiFePO4 Configurable Battery Pack 5KWh Home Energy Storage System ...
20KWh LiFePO4 Battery Portable Power Supply MPPT Solar Charge Type 20KWh Home Energy Storage System ...
Product Description: Introducing the Portable Power Station – a powerful and reliable portable ...
Product Description: Introducing the Portable Power Station – a powerful and reliable portable ...