Home Companies Shenzhen Super Fast Laser Technology Co., Ltd.

100w Laser Rust Removal System Portable Rust Descaling Machine 110V / 220V

Active Member

Contact Us

[China]

Address: 3rd Floor, Building 3, No. 128 Shangnan East Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China

Contact name:Ivan

Shenzhen Super Fast Laser Technology Co., Ltd.

100w Laser Rust Removal System Portable Rust Descaling Machine 110V / 220V

Country/Region	china
City & Province	shenzhen guangdong

Product Details

100w Laser Rust Removal System Portable Rust Descaling Machine 110V / 220V

Product description
(1) The laser cleaning machine is the latest high-tech product. Easy to install, operate, easy to achieving automation. Plug-in power, turn on and start cleaning - without chemicals, media, dust, water.

(2) Cleaning with no detergent, no media, no dust, no water. Autofocus, can clean curved surface, gentle cleaning surface. Cleaning resin, oil stain, rust, coating materials, paints on the workpiece surface.

Intelligent Automatic Laser Cleaning Equipment
The non-contact laser cleaning machine R&D by Super Fast is the new high-tech product. It does not hurt the base material, no consumables, energy-saving, and environmental protection. The resin, oil, stains, dirt, rust, coating, plating, paint on the workpiece surface can be removed with high efficiency. This meets the requirements of complex modeling and precision production cleaning in the industrial processing field, achieves a higher level cleaning effect and lower production cost.
The machine mainly used for the automotive industry, machining, electronic processing, cultural relics, mold industry, shipbuilding, food processing, petrochemical, and other industries.

Item	L/N	Characteristics	Test Conditions	Min.	Typical	Max.	Unit
Electrical Characteristics	1	Power Voltage	220	210	220	230	AC
	2	Maximum current loss	Pout=Pnom	4	5	6	A
	3	Total Power	600	590	600	610	W
	4	Fiber Cable	5	5	5	10	M
General Characteristics	1	Working temperature range		0	/	60	℃
	2	Storage temperature		-10	/	60	℃
	3	Laser power		100			W
	4	Peak power		>10KW			KW
	5	Cooling method		Air Cooling
	6	Laser level		4 Class
	7	Pulse energy		1.5mJ			mJ
	8	Laser wavelength		1064			nm
	9	Preheat time		Reach to start operation		0	s
	9	Preheat time		Achieve complete stability		10	s
	10	Humidity		10	/	95	%
	11	Laser machine size		L647W440H859			mm
	12	Weight		70			kg

Cleaning system setting page

● Field lens selection

Focusing mirror parameter selection, optional display 160mm focal length, 254mm focal length, 330mm focal length

● Galvanometer speed

The mirror swing speed is adjustable. The X mirror is 50HZ at the fastest and 50/30 per gear. The Y mirror is 200HZ at the fastest and 200/30 per gear.

● Laser frequency

Laser pulse frequency, 1K-200K optional.

● Laser power

Laser output power can be adjusted from 1 to 100.

● Laser pulse width

Use it while using a adjustable pulse width laser machine

● Graphic length (laser pattern is square)

The length of the laser beam. The maximum length is 120MM, and the length can be adjusted freely within 0-120mm range.

● Graphic width (laser pattern is square)

The width is up to 4MM, and the width can be adjusted freely within 0-40mm range.

● Filling pitch

The distance between lasers while cleaning with a circular laser.

● Opening delay and closing delay

When the laser galvanometer speed is too fast and the graphic length is too long, the ideal effect can be achieved by setting the switching light delay.

● Outer circle radius (laser pattern is ring)

The max. outer radius of the graphic outer circle is 40 mm, and the radius can be adjusted during the circular size. When the graph is circular, the inner circle radius is set to 0.

● Inner circle radius (laser pattern is ring)

The figure is a ring, and the radius of the inner circle can be set up to 40MM (but not larger than the radius of the outer circle). In this range, the radius can be adjusted to change the ring size.

● Application

While parameters were set in the interface. If you enable this set of parameters, click Application.

● Save

After set the parameters in the interface, remember to click “Save” to save the parameters for the next direct use.

● Red light

When the button is pressed, the red button turns red and the red light comes out. Press again and the red button will return to gray and turn off the red light.

● Laser

Laser light button, press the button, the laser light comes out. If the red light is emitted at this time, the laser will be forced out. Press the laser button again to turn off the laser light and the button will return to gray.

● Group

Mode selection, you can save nine sets of data. Click on the number on the left side of the mode, you can select the set mode parameters freely, click on the application. Remember to save the data after the parameter wat set in each interface.